Specifications

MIDI Control Surfaces Guide46
REC/RDY Switch
The REC/RDY (Record Ready) switch enables a
track for recording. The REC/RDY switch LED
flashes when engaged (Record-ready) and re-
mains lit when Pro Tools begins recording
(Record).
MASTER REC/RDY Switch
This switch acts as a REC/RDY master for disk
tracks. If no channels are record-enabled, this
switch enables all tracks. If any disk track in the
session is enabled for recording, the MASTER
REC/RDY switch flashes. If any tracks are record-
enabled, pressing the MASTER REC/RDY switch
disables all tracks.
To record enable all tracks:
■ Press OPTION/ALL+ any REC/RDY switch that
is not record-enabled. This record-enables all
tracks up to the maximum number of voices
available for recording in your system.
To disable all tracks for recording:
■ Press OPTION/ALL+ any REC/RDY switch that
is already record-enabled.
To toggle all enabled REC/RDY switches on and
off:
■ Press the Master REC/RDY ALL switch located
in the Select/Assign section.
To record enable selected tracks only:
■ Press OPTION/ALL+SHIFT/ADD+ the
REC/RDY switch on any of the selected tracks.
SOLO and MUTE Switches
When the MUTE and SOLO switches are en-
abled, their LEDs light.
Soloed channels flash the MUTE switch LEDs on
all other channels that are not explicitly muted.
The MUTE switch LEDs on channels that are ex-
plicitly muted when others are soloed are lit
continuously.
To enable Solo or Mute on multiple channels:
◆ OPTION/ALL+SOLO: Enables or clears Solos
on all channels.
◆ OPTION/ALL+SHIFT/ADD+SOLO: Enables or
clears Solos on all selected channels.
◆ OPTION/ALL+MUTE: Enables or clears mutes
on all channels.
◆ OPTION/ALL+SHIFT/ADD+MUTE: Enables or
clears mutes on all selected channels.
These keyboard shortcuts do not apply to send
mutes when using the V-SEL switch.
REC/RDY
SOLO
MUTE