Specifications

Chapter 3: Mackie HUI Control Surface 45
Display of Inactive Items
The @ symbol indicates inactive status for the
following items:
• Inputs
• Outputs
• Sends
• Inserts
•Tracks
• Plug-Ins, when unavailable or missing
• Paths that are inactive in the I/O Setup dialog
Inactive Outputs
HUI uses two symbols to display the different
inactive states possible for outputs.
@ Indicates that only one output is assigned,
and it is currently inactive. (For example,
@Out 1–2.)
* Indicates more than one output is assigned,
at least one of which is inactive. (For example,
*Out 1–2.)
SELECT Switch
When a channel is selected, its SELECT switch
LED lights. Selected channels remain selected
even when not displayed in the current bank
view.
To select multiple channels:
■ While pressing a channel’s SELECT switch,
press SELECT switches on additional channels.
To deselect a single channel:
■ Press SHIFT/ADD+ the SELECT switch on the
channel.
To select or deselect multiple channels:
■ Press SHIFT/ADD+SELECT switches on addi-
tional channels.
To select or deselect all channels:
■ Press OPTION/ALL+ any SELECT switch.
To change the SELECT state of a channel, and
change all other channels to the opposite state:
■ Press ALT/FINE+ any lit SELECT switch.
SELECT