Specifications

MIDI Control Surfaces Guide44
Pre/Post Send Display Displays the pre or post
status of an individual send when changing it
with the channel’s V-SEL switch.
Level display Displays level in dB on the when
you press ALT/FINE and move a fader.
Numeric PAN position Displays numeric pan
value when you press ALT/FINE and move the
channel’s V-POT while in pan display mode.
Assigning MIDI Outputs
You can view and assign channel outputs for
MIDI tracks. You can also assign multiple MIDI
channels to a single track.
To assign MIDI outputs from HUI:
1 Press ASSIGN+OUTPUT.
2 Use the Rotary Data Encoder for the track to
select the MIDI device and channel.
3 While the channel is selected, press the V-SEL
switch.
4 When MIDI output assignment is completed,
press the Master ASSIGN switch to confirm and
exit Assign mode.
Assigning Multiple Outputs
HUI supports the ability to assign multiple out-
puts to a Pro Tools track.
To assign an additional output to a channel:
1 Press the master ASSIGN and OUTPUT
switches (in the Select/Assign section).
2 On the appropriate channel, rotate the en-
coder until it displays the additional output you
want to assign. The currently assigned output (if
any) is indicated with the > symbol (for exam-
ple, “>Out 1–2”).
3 Press CTL|CLUTCH + ASSIGN to confirm the
additional output assignment. Use the channel
Assign/Mute or master Assign switch as needed:
■ The channel Assign/Mute switch confirms the
setting and leaves HUI in Assign mode. Use this
to continue assigning other channels.
■ Pressing the master ASSIGN switch confirms
and exits Assign mode. Use this when you are
through assigning channel outputs.
Display of Multiple Assignments
Multiple output assignments are indicated with
“+” in front of the assigned path’s names. For ex-
ample, +Out 1–2.
Other symbols indicate inactive status (see “In-
active Outputs” on page 45).
If assigning multiple MIDI channels, per-
form steps 2 and 3 while pressing
SHIFT/ADD.