Specifications

MIDI Control Surfaces Guide40
To adjust the zoom view:
◆ Left Arrow: Decreases horizontal zoom
◆ Right Arrow: Increases horizontal zoom
◆ Up Arrow: Increases vertical zoom
◆ Down Arrow: Decreases vertical zoom
Zoom Presets
You can store and recall Zoom Presets from HUI.
To recall a Zoom Preset from HUI:
■ While pressing OPTION/ALL, press the Zoom
Preset’s number on the numeric keypad.
To store a Zoom Preset from HUI:
■ While pressing SHIFT/ADD, type the Zoom
Preset’s number on the numeric keypad.
Selection Mode
In Selection mode, the ZOOM switch LED
flashes. In this mode you can create and adjust
waveform selections in conjunction with the
Scrub/Shuttle Wheel.
To make a selection:
1 Press the ZOOM/SEL switch until the center
switch LED flashes.
2 Press the Left Arrow switch and move the
wheel to adjust the selection in-point.
3 Press the Right Arrow switch and move the
wheel to adjust the selection out-point.
You can you define on-screen selections for ed-
iting, or move your set selection length around
the screen.
If you have defined a selection in which you
want to perform a series of fader and pan moves,
you can use the Pro Tools Loop Playback mode
to rehearse them over selection.
Selection Tips
These tips can also be helpful in making your se-
lection:
◆ Press ALT/FINE to scrub at a fixed fine resolu-
tion, regardless of the current zoom settings.
◆ Press SHIFT/ADD to make a new selection
while scrubbing or shuttling. Release
SHIFT/ADD to complete the selection.
◆ Press OPTION/ALL to begin scrubbing or
shuttling from the end of a selection.
Once you have finished making a selection, you
can adjust it using the following keyboard short-
cuts while still in Scrub or Shuttle mode:
To position the edit cursor at a selection’s edge:
◆ Double-click the Left Arrow to position the
cursor at the current selection’s left edge.
◆ Double-click the Right Arrow to position the
cursor at the current selection’s right edge.
To move the edit selection:
◆ Up Arrow: Moves the selection to the previous
track.
◆ Down Arrow: Moves the selection to the next
track.
To adjust selection points:
◆ Left Arrow+Scrub/Shuttle wheel adjusts the
selection IN point.
◆ Right Arrow+Scrub/Shuttle wheel adjusts the
selection OUT point.
◆ Left Arrow+Right Arrow+Scrub/Shuttle wheel
adjusts the selection’s time position while re-
taining its duration.