Specifications

Chapter 3: Mackie HUI Control Surface 39
Zoom Switch Quadrant
This switch group consists of four arrows plus
the ZOOM/SEL switch, which cycles the switch
quadrant through three different modes.
Navigation Mode
In Navigation mode, the ZOOM switch LED is
off. The switch quadrant acts as re-
gion/edit/track location selector.
To position the edit cursor:
◆ Left Arrow: Moves the edit cursor to previous
region boundary or sync point.
◆ Right Arrow: Moves the edit cursor to next re-
gion boundary or sync point.
To extend the edit selection:
◆ Press SHIFT/ADD to extend the selection
◆ SHIFT/ADD+Left Arrow will select the preced-
ing region boundary
◆ SHIFT/ADD+Right Arrow will select the for-
ward region boundaries
To center selection points on-screen:
◆ OPTION/ALL+Left Arrow (or the IN transport
switch): Centers the left side of the current on-
screen waveform selection in the Edit Window.
◆ OPTION/ALL+Right Arrow (or the OUT trans-
port switch): Centers the right side of the on-
screen waveform selection in the Edit Window.
Marking In and Out
The Up and Down Arrows can be used as mark-
in and mark-out controls. You can also do this
with the HUI “In” and “Out” switches in the
AUDITION switch row.
Moving the Edit Cursor and Edit
Selection to Adjacent Tracks
The Up and Down Arrows can also be used to
move the Edit cursor to the next or previous
track. In addition, you can move or extend Edit
selections to the next or previous track.
To move the Edit cursor or an Edit selection to the
previous or next track from HUI:
1 Make sure the ZOOM/SEL switch is in Naviga-
tion mode. If necessary, press the switch until it
becomes unlit.
2 Press UP or DOWN to move the cursor or se-
lection to the previous or next track.
To extend an Edit selection to the previous or next
track from HUI:
1 Make sure the ZOOM/SEL switch is in Naviga-
tion mode. If necessary, press the switch until it
becomes unlit.
2 While pressing SHIFT/ADD, press UP or
DOWN to extend the selection to the previous
or next track.
Zoom Mode
Press the Zoom switch once to enter Zoom
mode. The ZOOM switch LED lights to indicate
Zoom mode. The switch quadrant controls the
waveform zoom display.
ZOOM/SEL