Specifications

ManualsBrandsCM Labs ManualsAudio Mixermotor mix

Chapter 3: Mackie HUI Control Surface 37

To save the changes in a session:

1 Press SAVE. The SAVE switch LED ﬂashes

when ﬁrst pressed, indicating the Save process

has been armed.

2 Do one of the following:

■ To complete the Save process, press the SAVE

switch again.

■ To abort the Save process, press the F8/ESC

switch.

EDIT MODE and EDIT TOOL

Switches

The EDIT MODE and EDIT TOOL switches ac-

cess the primary Edit function modes and tools:

EDIT MODE Cycles through the four edit

modes: Shuffle, Slip, Spot, and Grid.

EDIT TOOL Cycles through the main edit tools:

Zoom, Trim, Select, Grabber, Smart Tool, Scrub,

and Pencil.

Smart Tool Press EDIT TOOL+7 (on the numeric

keypad) to select the Smart Tool.

You can directly select an Edit Tool or Edit mode

using key combinations with numbers on the

HUI Numeric Keypad:

Refer to the Pro Tools Reference Guide for de-

tails on Edit Tool functions.

Key Combination Edit Mode or Tool

EDIT MODE+1 Shufﬂe mode

EDIT MODE+2 Slip mode

EDIT MODE+3 Spot mode

EDIT MODE+4 Grid mode

EDIT TOOL+1 Selects Zoom tool

EDIT TOOL+2 Selects Scrub tool

EDIT TOOL+3 Selects Trim tool

EDIT TOOL+4 Selects Select tool

EDIT TOOL+5 Selects Grabber tool

EDIT TOOL+6 Selects Pencil tool

EDIT TOOL+7 Selects Smart tool