Specifications

MIDI Control Surfaces Guide30
Fast Forward/Rewind Settings
When the Audio During Fast Forward/Rewind
option is selected in the Operation Preferences,
you will hear scanned audio (as on a CD player)
during rewind and fast forward.
If the Audio During Fast Forward/Rewind op-
tion is not selected, you can continuously re-
wind or fast forward by holding down the corre-
sponding switch. You can also rewind or fast
forward incrementally by repeatedly clicking
the corresponding switch. The size of these in-
crements depends on which Display mode is
currently selected:
◆ Bars/Beats: Moves to start of previous or next
bar
◆ Min/Sec: Moves in one-second increments
◆ Timecode: Moves in one-frame increments
◆ Feet.Frames: Moves in one-foot increments
◆ Samples: Moves in one-sample increments
In addition, there are these shortcuts for trans-
port functions:
◆ SHIFT/ADD+PLAY: Initiates half-speed play-
back
◆ SHIFT/ADD+STOP: Aborts the current record
pass
◆ SHIFT/ADD+FAST FORWARD: Go-To-End
◆ SHIFT/ADD+REWIND: Return to zero
◆ CTRL/CLUTCH+RECORD: Cycles through
record modes (normal, QuickPunch, Loop)
◆ CTRL/CLUTCH+ONLINE: Cycles through
available machine master choices, as displayed
in the Transport window
Link or Unlink Edit and Timeline
You can link or unlink the Edit and Timeline se-
lections from HUI.
To link or unlink the Edit and Timeline selections
from HUI:
■ While pressing SHIFT/ADD, press slash (/) on
the numeric keypad for HUI.
Loop Record Mode
To place Pro Tools into Loop Record mode, press
CTRL/CLUTCH+LOOP.
Loop Record mode is indicated by a loop
graphic on the Record button in the Transport
window.
Transport Control of External Devices
The HUI can be used to control devices other
than Pro Tools, such as the Alesis ADAT® via
MIDI Machine Control, or serial (9-pin) ma-
chine control transports (using the Machine-
Control™ option for Pro Tools).
To cycle through available transport master types:
■ While pressing the CTRL/CLUTCH switch,
press the ONLINE switch.
When Serial Machine is transport master, you
can also jog or shuttle the deck by turning the
Scrub/Shuttle wheel.
The HUI RECORD switch LED reflects the state
of the device under control.