Specifications
Chapter 2: CM Labs MotorMix 21
Plug-In Bypass
Press the FX BYPS switch to assign the MULTI
switches to function as Plug-In Bypass switches.
The green LED in the MULTI switch indicates
that all the Plug-Ins on that channel are by-
passed.
Controlling Sends
To control Sends:
1 Rotate the Rotary Selector clockwise and the
Rotary Selector display will read “SA” for Send A.
2 Turn the rotary selector again to select Sends B
through E.
Send levels are graphically represented in the
lower row of the LCD. The lower LCD row will
be blank on a channel if no Send is assigned for
that channel.
To set a channel send to unity:
1 Select any send (A–E) using the Rotary Selec-
tor.
2 Press and hold the DEFAULT switch.
3 Press any channel MULTI switch.
To set a channel send to unity for all channels:
1 Select any send (A–E) using the Rotary Selec-
tor.
2 Press and hold the ALL switch.
3 Press and hold the DEFAULT switch.
4 Press any channel MULTI switch.
Send Pre and Post Assign
To assign the MULTI switches to function as Send
pre- and post-fader toggle controls:
■ Press the PRE/PST switch.
For example, rotate the Rotary Selector to select
Send A, “SA,” and press a channel’s MULTI
switch to toggle between pre- and post-fader for
Send A on that channel. The channel’s MULTI
switch LED is lit when the Send is pre-fader, and
the it is not lit when the Send is post-fader. The
LCD will briefly display “Pre” or “Post” when
toggling between these two settings. Use the Ro-
tary Selector to select other sends to mute or un-
mute.
Assign Mode
To enter Assign mode:
1 Press SHIFT+ASSIGN. The ASSIGN switch LED
will start flashing.
2 Rotate the selector to select SEND A through
SEND E, or any channel Inputs (IN) or Outputs
(OUT).
3 Use a channel’s Rotary Pot to change the
Send, Input, or Output assignments for that
channel.
4 Press ASSIGN finalize assignments or ESCAPE
to cancel.
Send Mute
To assign the MULTI switches to function as send
mute controls:
■ Press the S MUTE switch.
You can similarly use the DEFAULT and
ALL switches in Flip mode. See “Flip Mode
for Sends” on page 22.
Pressing the Rotary Selector will also enable
the PRE/PST MULTI Control mode.