Specifications

MIDI Control Surfaces Guide18
Transport Controls
PLAY Press this switch to activate playback in
Pro Tools. The LED will be lit to indicate
Pro Tools is playing.
STOP Press this switch to stop. The LED will be
lit to indicate Pro Tools is stopped.
F FWD Press this switch to activate Fast Forward.
The LED will be lit to indicate Pro Tools is in fast
foreword.
REWIND Press this switch to activate Rewind.
The LED will be lit to indicate Pro Tools is re-
winding.
Transport Mode
Press SHIFT+TRANSPORT to enter Transport
mode. The bottom row of the LCD will show
five transport controls and the current time.
Press a SELECT switch to activate a transport
function. The REW and FFWD controls are mo-
mentary in this mode.
The RECORD switch is the master record enable.
Press the TRANSPORT switch again to exit
Transport mode.
Memory Locations
To create memory locations:
1 Press the ENTER switch. The New Memory Lo-
cation dialog will open in Pro Tools.
2 Press the ENTER switch again or press ESCAPE
to cancel.
To move to the next memory-locate position:
■ Press the NEXT switch.
To move to the previous memory-locate position:
■ Press the LAST switch.
Locate Mode
Locate mode provides control over certain
transport and memory location functions in
Pro Tools. When in Locate mode, the bottom
row of the LCD displays the current time and
five locate controls:
RTZ Pressing the SELECT switch under RTZ dis-
played in the LCD will locate the beginning of
the session.
END Pressing the SELECT switch under END dis-
played in the LCD will locate the end of the ses-
sion.
LOOP Pressing the SELECT switch under LOOP
displayed in the LCD enables Loop Playback in
Pro Tools.
PUNCH Pressing the SELECT switch under
PUNCH displayed in the LCD enables Punch
Record in Pro Tools.
LOCAT Pressing the SELECT switch under LO-
CAT displayed in the LCD opens the Memory
Locations window in Pro Tools.
To use the Locate function on the MotorMix:
1 Choose Setups > Preferences.
2 Select the Operation tab.
3 Select Classic for the Numeric Keypad mode
preference.
4 Click Done.
To enter Locate mode:
■ Press SHIFT+LOCATE on the MotorMix.