Owner`s manual

ManualsBrandsCM Labs ManualsAudio Mixermotor mix

Pro Tools Operations

Page 5 CM Labs MotorMix Owners Manual Ver 3.0

“configure”

This switch is rThis switch is r

This switch is r

esereser

eser

ved for futurved for futur

ved for futur

e use.e use.

e use.

“LAST”

PrPr

ess this switch to move to the press this switch to move to the pr

ess this switch to move to the pr

evious memorevious memor

evious memor

y-locate position.y-locate position.

y-locate position.

“assign”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “assign” switch. The LED will flash.ess the “assign” switch. The LED will flash.

ess the “assign” switch. The LED will flash.

Rotate the selector to select; SEND A thrRotate the selector to select; SEND A thr

Rotate the selector to select; SEND A thr

u SEND E, Input “In” or Output u SEND E, Input “In” or Output

u SEND E, Input “In” or Output

“Out”.“Out”.

“Out”.

Each channel rEach channel r

Each channel r

otarotar

otar

y pot is used to change the assignment. Pry pot is used to change the assignment. Pr

y pot is used to change the assignment. Pr

ess ess

ess

“ESCAPE” or“ESCAPE” or

“ESCAPE” or

“status” to close the window“status” to close the window

“status” to close the window

“ENTER”

This switch duplicates the keyboarThis switch duplicates the keyboar

This switch duplicates the keyboar

d “ENTER” switch. It is used to end a d “ENTER” switch. It is used to end a

d “ENTER” switch. It is used to end a

prpr

ocessocess

ocess

like grlike gr

like gr

ouping.ouping.

ouping.

“utility”

This switch is rThis switch is r

This switch is r

esereser

eser

ved for futurved for futur

ved for futur

e use.e use.

e use.

“ESCAPE”

This switch is used to exit prThis switch is used to exit pr

This switch is used to exit pr

ocesses beforocesses befor

ocesses befor

e completion. e completion.

e completion.

MotorMix with keyboarMotorMix with keyboar

MotorMix with keyboar

Most of the computer keyboarMost of the computer keyboar

Most of the computer keyboar

d switches like “Contrd switches like “Contr

d switches like “Contr

ol”, “Shift”, “Alt”, etc. ol”, “Shift”, “Alt”, etc.

ol”, “Shift”, “Alt”, etc.

alsoalso

also

perper

per

forfor

for

m their usual Prm their usual Pr

m their usual Pr

o To T

o T

ools functions in conjunction with MotorMix. ools functions in conjunction with MotorMix.

ools functions in conjunction with MotorMix.

ForFor

For

example; Prexample; Pr

example; Pr

essing the “CNTRL” key on the keyboaressing the “CNTRL” key on the keyboar

essing the “CNTRL” key on the keyboar

d allows you to d allows you to

d allows you to

move a fadermove a fader

move a fader

independently or other faders in its grindependently or other faders in its gr

independently or other faders in its gr

oup. Think of it as oup. Think of it as

oup. Think of it as

momentarily rmomentarily r

momentarily r

eleasingeleasing

eleasing

the fader of a grthe fader of a gr

the fader of a gr

oup. Release the “CNTRL” key to oup. Release the “CNTRL” key to

oup. Release the “CNTRL” key to

put the fader back under grput the fader back under gr

put the fader back under gr

oupoup

oup

contrcontr

contr

ol.ol.

ol.

MotorMix with keyboard

Most of the computer keyboarMost of the computer keyboar

Most of the computer keyboar

d switches like “Contrd switches like “Contr

d switches like “Contr

ol”, “Shift”, “Alt”, etc. ol”, “Shift”, “Alt”, etc.

ol”, “Shift”, “Alt”, etc.

alsoalso

also

perper

per

forfor

for

m their usual Prm their usual Pr

m their usual Pr

o To T

o T

ools functions in conjunction with MotorMix. ools functions in conjunction with MotorMix.

ools functions in conjunction with MotorMix.

ForFor

For

example; Prexample; Pr

example; Pr

essing the “CNTRL” key on the keyboaressing the “CNTRL” key on the keyboar

essing the “CNTRL” key on the keyboar

d allows you to d allows you to

d allows you to

move a fadermove a fader

move a fader

independently or other faders in its grindependently or other faders in its gr

independently or other faders in its gr

oup. Think of it as oup. Think of it as

oup. Think of it as

momentarily rmomentarily r

momentarily r

eleasingeleasing

eleasing

the fader of a grthe fader of a gr

the fader of a gr

oup. Release the “CNTRL” key to oup. Release the “CNTRL” key to

oup. Release the “CNTRL” key to

put the fader back under grput the fader back under gr

put the fader back under gr

oupoup

oup

contrcontr

contr

ol.ol.

ol.

Function Switches to Right of Faders

“PLAY”

PrPr

ess this switch to activate PLAess this switch to activate PLA

ess this switch to activate PLA

. The LED will be lit to indicate Pr. The LED will be lit to indicate Pr

. The LED will be lit to indicate Pr

o To T

o T

ools isools is

ools is

playing.playing.

playing.

“transport”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “transporess the “transpor

ess the “transpor

t” switch. The bottom rt” switch. The bottom r

t” switch. The bottom r

ow ofow of

ow of

the LCD will show 5 transporthe LCD will show 5 transpor

the LCD will show 5 transpor

t contrt contr

t contr

ols and the curols and the cur

ols and the cur

ent time code, bars/ beats,ent time code, bars/ beats,

ent time code, bars/ beats,

feet frames, etc. Prfeet frames, etc. Pr

feet frames, etc. Pr

ess a “SELECT” switch to activate a transporess a “SELECT” switch to activate a transpor

ess a “SELECT” switch to activate a transpor

t function. Thet function. The

t function. The

“REW” and “FFWD” contr“REW” and “FFWD” contr

“REW” and “FFWD” contr

ols arols ar

ols ar

e momentare momentar

e momentar

y in this mode. The “RECORD” switchy in this mode. The “RECORD” switch

y in this mode. The “RECORD” switch

is the master ris the master r

is the master r

ecorecor

ecor

d enable. Prd enable. Pr

d enable. Pr

ess the “transporess the “transpor

ess the “transpor

t” switch again to exit.t” switch again to exit.

t” switch again to exit.

“STOP”

PrPr

ess this switch to stop PLAess this switch to stop PLA

ess this switch to stop PLA

, REWIND or F, REWIND or F

, REWIND or F

AST FORAST FOR

AST FOR

ARD. The LED will be lit toARD. The LED will be lit to

ARD. The LED will be lit to

indicate Prindicate Pr

indicate Pr

o To T

o T

ools is stopped.ools is stopped.

ools is stopped.

“locate”

Note: TNote: T

Note: T

o use the “locate” function on MotorMix, you must be in Classic Numerico use the “locate” function on MotorMix, you must be in Classic Numeric

o use the “locate” function on MotorMix, you must be in Classic Numeric

Keypad Mode. See instrKeypad Mode. See instr

Keypad Mode. See instr

uctions for setting Pructions for setting Pr

uctions for setting Pr

o To T

o T

ools to Classic Numeric Keypadools to Classic Numeric Keypad

ools to Classic Numeric Keypad

Mode on page 1 - section #7.Mode on page 1 - section #7.

Mode on page 1 - section #7.

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “locate” switch. The bottom ress the “locate” switch. The bottom r

ess the “locate” switch. The bottom r

ow of theow of the

ow of the

LCD will show 5 locate contrLCD will show 5 locate contr

LCD will show 5 locate contr

ols and the curols and the cur

ols and the cur

ent time code, bars/beats, feetent time code, bars/beats, feet

ent time code, bars/beats, feet

frames, etc. Prframes, etc. Pr

frames, etc. Pr

ess a “SELECT” switch to activate a transporess a “SELECT” switch to activate a transpor

ess a “SELECT” switch to activate a transpor

t function. The “REW”t function. The “REW”

t function. The “REW”

and “FFWD” contrand “FFWD” contr

and “FFWD” contr

ols arols ar

ols ar

e momentare momentar

e momentar

y in this mode. Pry in this mode. Pr

y in this mode. Pr

ess the “LOCAess the “LOCA

ess the “LOCA

TE” switch toTE” switch to

TE” switch to

use the autolocate. The Memoruse the autolocate. The Memor

use the autolocate. The Memor

y-Locate window will open. Pry-Locate window will open. Pr

y-Locate window will open. Pr

ess one or twoess one or two

ess one or two

number keys on MotorMix and the “.” key to activate locate. Prnumber keys on MotorMix and the “.” key to activate locate. Pr

number keys on MotorMix and the “.” key to activate locate. Pr

ess “ESCAPE” atess “ESCAPE” at

ess “ESCAPE” at

any time to exit or enter a locate. Prany time to exit or enter a locate. Pr

any time to exit or enter a locate. Pr

ess the “locate” switch again to exit.ess the “locate” switch again to exit.

ess the “locate” switch again to exit.

“Fast Forward”

PrPr

ess this switch to activate Fess this switch to activate F

ess this switch to activate F

AST FORAST FOR

AST FOR

ARD. The LED will be lit to indicate PrARD. The LED will be lit to indicate Pr

ARD. The LED will be lit to indicate Pr

ools is in fast forools is in fast for

ools is in fast for

eworewor

ewor

d.d.

“monitor”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “monitor” switch. The bottom ress the “monitor” switch. The bottom r

ess the “monitor” switch. The bottom r

ow of theow of the

ow of the

LCD will show 5 punch/monitor contrLCD will show 5 punch/monitor contr

LCD will show 5 punch/monitor contr

ols and the curols and the cur

ols and the cur

ent time code, bars/beats,ent time code, bars/beats,

ent time code, bars/beats,

feet frames, etc. Prfeet frames, etc. Pr

feet frames, etc. Pr

ess “AUD” audition the punch pointeress “AUD” audition the punch pointer

ess “AUD” audition the punch pointer

. Pr. Pr

. Pr

ess “PRE”, “IN”,ess “PRE”, “IN”,

ess “PRE”, “IN”,

“OUT” or “POST” to audition the punch points. Pr“OUT” or “POST” to audition the punch points. Pr

“OUT” or “POST” to audition the punch points. Pr

ess the “monitor” switch againess the “monitor” switch again

ess the “monitor” switch again

to exit.to exit.

to exit.

“Rewind”

PrPr

ess this switch to activate REWIND. The LED will be lit to indicate Press this switch to activate REWIND. The LED will be lit to indicate Pr

ess this switch to activate REWIND. The LED will be lit to indicate Pr

o To T

o T

ools isools is

ools is

ewinding.ewinding.

ewinding.

“status”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “status” switch. This opens the Press the “status” switch. This opens the Pr

ess the “status” switch. This opens the Pr

ools session status windowools session status window

ools session status window

. Pr. Pr

. Pr

ess “SHIFT” and “status” again to closeess “SHIFT” and “status” again to close

ess “SHIFT” and “status” again to close

the windowthe window

the window

“NEXT”“NEXT”

“NEXT”

PrPr

ess this switch to move to the next memoress this switch to move to the next memor

ess this switch to move to the next memor

y-locate position.y-locate position.

y-locate position.