Owner`s manual

ManualsBrandsCM Labs ManualsAudio Mixermotor mix

CM Labs MotorMix Owners Manual Ver 3.0 Page 4

Pro Tools Operations

“PLUG-IN” Control

Use the “SELECT” switch to select a channel with a Plug-in assigned. PrUse the “SELECT” switch to select a channel with a Plug-in assigned. Pr

Use the “SELECT” switch to select a channel with a Plug-in assigned. Pr

ess ess

ess

thethe

the

“PLUG-IN” switch to enable the LCD, r“PLUG-IN” switch to enable the LCD, r

“PLUG-IN” switch to enable the LCD, r

otarotar

otar

y pots and “SELECT” switches y pots and “SELECT” switches

y pots and “SELECT” switches

toto

contrcontr

contr

ol your Plug-ins. The Plug-in window will open and the rol your Plug-ins. The Plug-in window will open and the r

ol your Plug-ins. The Plug-in window will open and the r

otarotar

otar

y pots y pots

y pots

andand

and

selector will become Plug-in contrselector will become Plug-in contr

selector will become Plug-in contr

ols. The 7 segment displays will say ols. The 7 segment displays will say

ols. The 7 segment displays will say

“IN” For“IN” For

“IN” For

inserinser

inser

t contrt contr

t contr

ol or “Pol or “P

ol or “P

A” for parameter contrA” for parameter contr

A” for parameter contr

ol. Push the selector to ol. Push the selector to

ol. Push the selector to

toggle betweentoggle between

toggle between

inserinser

inser

t and parameter contrt and parameter contr

t and parameter contr

ol.ol.

ol.

Insert control mode

TherTher

Ther

e is an LCD page for Insere is an LCD page for Inser

e is an LCD page for Inser

ts 1-4 and one for Inserts 1-4 and one for Inser

ts 1-4 and one for Inser

t 5. Rotate the t 5. Rotate the

t 5. Rotate the

selector toselector to

selector to

select either page. The top rselect either page. The top r

select either page. The top r

ow of the LCD will display both the ow of the LCD will display both the

ow of the LCD will display both the

inserinser

inser

t page andt page and

t page and

the curthe cur

the cur

ent channel being contrent channel being contr

ent channel being contr

olled. The lower LCD rolled. The lower LCD r

olled. The lower LCD r

ow ow

will display either “nowill display either “no

will display either “no

inserinser

inser

t” or a short” or a shor

t” or a shor

thand label for a Plug-in. If no label thand label for a Plug-in. If no label

thand label for a Plug-in. If no label

is flashing, that Plug-in isis flashing, that Plug-in is

is flashing, that Plug-in is

being contrbeing contr

being contr

olled by MotorMix. Use a “SELECT” olled by MotorMix. Use a “SELECT”

olled by MotorMix. Use a “SELECT”

switch to pick an inserswitch to pick an inser

switch to pick an inser

t tot to

t to

contrcontr

contr

ol, and the parameter control, and the parameter contr

ol, and the parameter contr

ol mode will ol mode will

ol mode will

become active.become active.

become active.

Parameter control mode

The LCD will display the Plug-in parameter names and settings. The top The LCD will display the Plug-in parameter names and settings. The top

The LCD will display the Plug-in parameter names and settings. The top

LCD rLCD r

LCD r

owow

and the “SELECT” switches will contrand the “SELECT” switches will contr

and the “SELECT” switches will contr

ol switchable parameters. The ol switchable parameters. The

ol switchable parameters. The

lower LCDlower LCD

lower LCD

ow and row and r

ow and r

otarotar

otar

y pots contry pots contr

y pots contr

ol continuously variable parameters. ol continuously variable parameters.

ol continuously variable parameters.

Note that theNote that the

Note that the

“SELECT” switch and the cor“SELECT” switch and the cor

“SELECT” switch and the cor

ect rect r

ect r

otarotar

otar

y pot will be just below y pot will be just below

y pot will be just below

the parameterthe parameter

the parameter

values on the LCD. Rotate the selector to move between values on the LCD. Rotate the selector to move between

values on the LCD. Rotate the selector to move between

parameter pages. Theparameter pages. The

parameter pages. The

upper left of the LCD displays Plug-in page/label.upper left of the LCD displays Plug-in page/label.

upper left of the LCD displays Plug-in page/label.

“compare”

ith “SHIFT” down, prith “SHIFT” down, pr

ith “SHIFT” down, pr

ess the “comparess the “compar

ess the “compar

e” switch to compare” switch to compar

e” switch to compar

e cure cur

e cur

ent Plug-inent Plug-in

ent Plug-in

settings with prsettings with pr

settings with pr

evious settings. This switch only comparevious settings. This switch only compar

evious settings. This switch only compar

es if the compares if the compar

es if the compar

e e

buttonbutton

button

is lit in the Plug-in windowis lit in the Plug-in window

is lit in the Plug-in window

“WINDOW”

PrPr

ess this switch, and the LCD scress this switch, and the LCD scr

ess this switch, and the LCD scr

een will display the Preen will display the Pr

een will display the Pr

o To T

o T

ools window ools window

ools window

choices,choices,

choices,

mixermixer

mixer

, memor, memor

, memor

y locations, edit, setup, transpory locations, edit, setup, transpor

y locations, edit, setup, transpor

t, insert, inser

t, inser

t editort editor

t editor

. The . The

. The

LED’LED’

LED’

s belows below

s below

the LCD show the open windows. Prthe LCD show the open windows. Pr

the LCD show the open windows. Pr

ess any of the switches ess any of the switches

ess any of the switches

below the LCD tobelow the LCD to

below the LCD to

open or close a windowopen or close a window

open or close a window

. Pr. Pr

. Pr

ess the “WINDOW” switch to ess the “WINDOW” switch to

ess the “WINDOW” switch to

close the window andclose the window and

close the window and

exit.exit.

exit.

“tools”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “tools” switch to select an edit tool.ess the “tools” switch to select an edit tool.

ess the “tools” switch to select an edit tool.

“ALL”

If the “ALL” switch is held down, the curIf the “ALL” switch is held down, the cur

If the “ALL” switch is held down, the cur

ent action will be applied acrent action will be applied acr

ent action will be applied acr

oss alloss all

oss all

channels. For example, prchannels. For example, pr

channels. For example, pr

ess “ALL” and then a “Mute” switch, and all ess “ALL” and then a “Mute” switch, and all

ess “ALL” and then a “Mute” switch, and all

channelschannels

channels

will be muted or unmuted.will be muted or unmuted.

will be muted or unmuted.

“alternate”

ith “SHIFT” prith “SHIFT” pr

ith “SHIFT” pr

essed down, pressed down, pr

essed down, pr

ess the “alteress the “alter

ess the “alter

nate” switch. Now move a fadernate” switch. Now move a fader

nate” switch. Now move a fader

and it’and it’

and it’

s attenuation settings will appear in the top LCD rs attenuation settings will appear in the top LCD r

s attenuation settings will appear in the top LCD r

ow for that ow for that

ow for that

channel.channel.

channel.

Move a rMove a r

Move a r

otarotar

otar

y pot, and the Py pot, and the P

y pot, and the P

AN setting or SEND attenuation will AN setting or SEND attenuation will

AN setting or SEND attenuation will

appear in theappear in the

appear in the

top LCD rtop LCD r

top LCD r

ow on that channel.ow on that channel.

ow on that channel.

Function Switches to Left of Faders

“AUTO ENBL”

PrPr

ess this switch, and the LCD scress this switch, and the LCD scr

ess this switch, and the LCD scr

een will display the automation enable een will display the automation enable

een will display the automation enable

choices.choices.

choices.

The LEDs’The LEDs’

The LEDs’

s below the LCD show the curs below the LCD show the cur

s below the LCD show the cur

ent enable states. Prent enable states. Pr

ent enable states. Pr

ess ess

ess

any of theany of the

any of the

switches below the LCD to choose a selection. Prswitches below the LCD to choose a selection. Pr

switches below the LCD to choose a selection. Pr

ess the “AUTO ess the “AUTO

ess the “AUTO

ENBL” switch toENBL” switch to

ENBL” switch to

exit.exit.

exit.

“auto mode”

ith “SHIFT” down, prith “SHIFT” down, pr

ith “SHIFT” down, pr

ess the “auto mode” switch, and the LCD scress the “auto mode” switch, and the LCD scr

ess the “auto mode” switch, and the LCD scr

een willeen will

een will

display the curdisplay the cur

display the cur

ent automation mode choices. The LED’ent automation mode choices. The LED’

ent automation mode choices. The LED’

s below the LCD s below the LCD

s below the LCD

show theshow the

show the

curcur

cur

ent mode. Rotate the rent mode. Rotate the r

ent mode. Rotate the r

otarotar

otar

y pots to choose a selection. y pots to choose a selection.

y pots to choose a selection.

PrPr

ess the “ALL”ess the “ALL”

ess the “ALL”

switch and rswitch and r

switch and r

otate a rotate a r

otate a r

otarotar

otar

y pot to change all channels be y pot to change all channels be

y pot to change all channels be

the same state.the same state.

the same state.

If your arIf your ar

If your ar

e playing back Pre playing back Pr

e playing back Pr

o To T

o T

ools automation tracks while in Punch or ools automation tracks while in Punch or

ools automation tracks while in Punch or

LatchLatch

Latch

automation mode, you can Punch In a fader by prautomation mode, you can Punch In a fader by pr

automation mode, you can Punch In a fader by pr

essing the “buressing the “bur

essing the “bur

n” n”

n”

button abovebutton above

button above

that faderthat fader

that fader

. The “bur. The “bur

. The “bur

n” button LED will shine steadily as long n” button LED will shine steadily as long

n” button LED will shine steadily as long

as the fader motoras the fader motor

as the fader motor

is disengaged. Tis disengaged. T

is disengaged. T

o Punch Out the fadero Punch Out the fader

o Punch Out the fader

, pr, pr

, pr

ess the “buress the “bur

ess the “bur

n” n”

n”

button again. The LEDbutton again. The LED

button again. The LED

will go out and the motor will engage.will go out and the motor will engage.

will go out and the motor will engage.

“SUSPEND”

PrPr

ess the “SUSPEND” switch to globally suspend playback and ress the “SUSPEND” switch to globally suspend playback and r

ess the “SUSPEND” switch to globally suspend playback and r

ecorecor

ecor

ding ofding of

ding of

automation. The LED will blink. Prautomation. The LED will blink. Pr

automation. The LED will blink. Pr

ess again to globally ress again to globally r

ess again to globally r

eactivate playback eactivate playback

eactivate playback

andand

and

ecorecor

ecor

ding of automation.ding of automation.

ding of automation.

“create”

The “crThe “cr

The “cr

eate” switch is used to create” switch is used to cr

eate” switch is used to cr

eate greate gr

eate gr

oups. First use the “SELECT” switchesoups. First use the “SELECT” switches

oups. First use the “SELECT” switches

below the LCD to select the a channel to include in a grbelow the LCD to select the a channel to include in a gr

below the LCD to select the a channel to include in a gr

oup. Proup. Pr

oup. Pr

ess and hold ess and hold

ess and hold

thethe

the

“SHIFT” switch . Pr“SHIFT” switch . Pr

“SHIFT” switch . Pr

ess moress mor

ess mor

e select switches to add channels. We select switches to add channels. W

e select switches to add channels. W

ith ith

ith

“SHIFT” still“SHIFT” still

“SHIFT” still

down prdown pr

down pr

ess the “cress the “cr

ess the “cr

eate” switch and the Preate” switch and the Pr

eate” switch and the Pr

o To T

o T

ools Grools Gr

ools Gr

oup dialog oup dialog

oup dialog

box will appearbox will appear

box will appear

PrPr

ess the “ENTER” switch on MotorMix to complete the ess the “ENTER” switch on MotorMix to complete the

ess the “ENTER” switch on MotorMix to complete the

prpr

ocess or “ESCAPE” toocess or “ESCAPE” to

ocess or “ESCAPE” to

exit without grexit without gr

exit without gr

ouping.ouping.

ouping.

The “grThe “gr

The “gr

oup” switch and LED under the “VIEW” section on MotorMix aroup” switch and LED under the “VIEW” section on MotorMix ar

oup” switch and LED under the “VIEW” section on MotorMix ar

e e

used toused to

used to

enable/disable grenable/disable gr

enable/disable gr

oups. If the LED is lit, the groups. If the LED is lit, the gr

oups. If the LED is lit, the gr

oups aroups ar

oups ar

e enabled. e enabled.

e enabled.

ith grith gr

ith gr

oupsoups

oups

enabled, prenabled, pr

enabled, pr

ess and hold the “SHIFT” switch then hold the ess and hold the “SHIFT” switch then hold the

ess and hold the “SHIFT” switch then hold the

“gr“gr

“gr

oup” switch down.oup” switch down.

oup” switch down.

The top rThe top r

The top r

ow of the LCD will show the channel ow of the LCD will show the channel

ow of the LCD will show the channel

grgr

oup assignments.oup assignments.

oup assignments.

“PLUG-IN” Assignment

1.)1.)

1.)

Use a “SELECT” switch (below the LCD) to pick a channel for Use a “SELECT” switch (below the LCD) to pick a channel for

Use a “SELECT” switch (below the LCD) to pick a channel for

plug inplug in

plug in

assignment.assignment.

assignment.

2.)2.)

2.)

PrPr

ess the “PLUG IN” switch to enter plug in mode.ess the “PLUG IN” switch to enter plug in mode.

ess the “PLUG IN” switch to enter plug in mode.

3.)3.)

3.)

PrPr

ess “SHIFT” and “assign” and the LCD display inseress “SHIFT” and “assign” and the LCD display inser

ess “SHIFT” and “assign” and the LCD display inser

ts 1-4. ts 1-4.

ts 1-4.

ou can useou can use

ou can use

the rthe r

the r

otarotar

otar

y selector switch to select insery selector switch to select inser

y selector switch to select inser

t 5 t 5

t 5

for assignment.for assignment.

for assignment.

4.)4.)

4.)

Rotate a rRotate a r

Rotate a r

otarotar

otar

y pot (even numbery pot (even number

y pot (even number

ed) on MotorMix to make a ed) on MotorMix to make a

ed) on MotorMix to make a

plug inplug in

plug in

selection for the desirselection for the desir

selection for the desir

ed insered inser

ed inser

t.t.

5.)5.)

5.)

PrPr

ess the “assign” switch again to complete assignments for ess the “assign” switch again to complete assignments for

ess the “assign” switch again to complete assignments for

that inserthat inser

that inser

t.t.

6.)6.)

6.)

Repeat steps 3-5 to add morRepeat steps 3-5 to add mor

Repeat steps 3-5 to add mor

e plug ins to that channel.e plug ins to that channel.

e plug ins to that channel.