Owner`s manual

ManualsBrandsCM Labs ManualsAudio Mixermotor mix

Pro Tools Set Up & Quickstart

Page 1 CM Labs MotorMix Owners Manual Ver 3.0

QuickStart, Setting up a Pro Tools /

MotorMix System

1.)1.)

1.)

ou will need a Prou will need a Pr

ou will need a Pr

o To T

o T

ools system with softwarools system with softwar

ools system with softwar

e version 4.1or latere version 4.1or later

e version 4.1or later

2.)2.)

2.)

Connect MotorMix MIDI IN and OUT to the MIDI OUT and IN on oneConnect MotorMix MIDI IN and OUT to the MIDI OUT and IN on one

Connect MotorMix MIDI IN and OUT to the MIDI OUT and IN on one

porpor

por

t of your functioning MIDI intert of your functioning MIDI inter

t of your functioning MIDI inter

face.face.

face.

3.)3.)

3.)

Launch OMS setup and define MotorMix: Is contrLaunch OMS setup and define MotorMix: Is contr

Launch OMS setup and define MotorMix: Is contr

oller on MIDIoller on MIDI

oller on MIDI

channel 1 (only 2 boxes checked). Note: If you archannel 1 (only 2 boxes checked). Note: If you ar

channel 1 (only 2 boxes checked). Note: If you ar

e usinge using

e using

multiple MotorMix units with Prmultiple MotorMix units with Pr

multiple MotorMix units with Pr

o To T

o T

ools, each unit must beools, each unit must be

ools, each unit must be

connected to the MIDI interconnected to the MIDI inter

connected to the MIDI inter

face with two MIDI cables. Repeatface with two MIDI cables. Repeat

face with two MIDI cables. Repeat

step 3 for each unit, but crstep 3 for each unit, but cr

step 3 for each unit, but cr

eate a unique name for each unit,eate a unique name for each unit,

eate a unique name for each unit,

like: MotorMix 1, MotorMix 2 etc.like: MotorMix 1, MotorMix 2 etc.

like: MotorMix 1, MotorMix 2 etc.

4.)4.)

4.)

Open a PrOpen a Pr

Open a Pr

o To T

o T

ools session and select “controols session and select “contr

ools session and select “contr

ollers” in theollers” in the

ollers” in the

peripherals menu.peripherals menu.

peripherals menu.

5.)5.)

5.)

Select “MotorMix” and then select MotorMix and the number ofSelect “MotorMix” and then select MotorMix and the number of

Select “MotorMix” and then select MotorMix and the number of

channels = 8. Note: If you archannels = 8. Note: If you ar

channels = 8. Note: If you ar

e using multiple MotorMix unitse using multiple MotorMix units

e using multiple MotorMix units

with Prwith Pr

with Pr

o To T

o T

ools, rools, r

ools, r

epeat step 3 for each unit, but crepeat step 3 for each unit, but cr

epeat step 3 for each unit, but cr

eate a uniqueeate a unique

eate a unique

name for each unit, like: MotorMix 1, MotorMix 2 etc.name for each unit, like: MotorMix 1, MotorMix 2 etc.

name for each unit, like: MotorMix 1, MotorMix 2 etc.

6.)6.)

6.)

If you arIf you ar

If you ar

e using Pre using Pr

e using Pr

o To T

o T

ools 5.xx, pull down the MIDI menu andools 5.xx, pull down the MIDI menu and

ools 5.xx, pull down the MIDI menu and

select “MIDI Input Devices”. Click on each MotorMix listed.select “MIDI Input Devices”. Click on each MotorMix listed.

select “MIDI Input Devices”. Click on each MotorMix listed.

This will enable PrThis will enable Pr

This will enable Pr

o To T

o T

ools to rools to r

ools to r

eceive its MIDI input.eceive its MIDI input.

eceive its MIDI input.

7.)7.)

7.)

In PrIn Pr

In Pr

o To T

o T

ools 5.x and higherools 5.x and higher

ools 5.x and higher

, go to the Set up window and choose, go to the Set up window and choose

, go to the Set up window and choose

PrPr

eferefer

efer

ences. In the Prences. In the Pr

ences. In the Pr

eferefer

efer

ences box, click on Operation. Thenences box, click on Operation. Then

ences box, click on Operation. Then

select ‘Classic’ located in the Numeric Keypad Mode Section.select ‘Classic’ located in the Numeric Keypad Mode Section.

select ‘Classic’ located in the Numeric Keypad Mode Section.

Classic Numeric Keypad allows you use the Locate function onClassic Numeric Keypad allows you use the Locate function on

Classic Numeric Keypad allows you use the Locate function on

MotorMix.MotorMix.

MotorMix.

8.)8.)

8.)

Move a MotorMix fader and the corMove a MotorMix fader and the cor

Move a MotorMix fader and the cor

esponding fader shouldesponding fader should

esponding fader should

move in the Prmove in the Pr

move in the Pr

o To T

o T

ools mix windowools mix window

ools mix window

9.)9.)

9.)

If you need to operate softwarIf you need to operate softwar

If you need to operate softwar

e other than Pre other than Pr

e other than Pr

o To T

o T

ools, you mustools, you must

ools, you must

first exit the Prfirst exit the Pr

first exit the Pr

o To T

o T

ools mode by prools mode by pr

ools mode by pr

essing the “PLAessing the “PLA

essing the “PLA

Y” andY” and

Y” and

“ESCAPE” switches on MotorMix. The LCD will say “Pr“ESCAPE” switches on MotorMix. The LCD will say “Pr

“ESCAPE” switches on MotorMix. The LCD will say “Pr

o To T

o T

oolsools

ools

mode - OFF -”. MotorMix will rmode - OFF -”. MotorMix will r

mode - OFF -”. MotorMix will r

emain in noremain in nor

emain in nor

mal operationmal operation

mal operation

mode until rmode until r

mode until r

eturetur

etur

ned to Prned to Pr

ned to Pr

o To T

o T

ools mode by prools mode by pr

ools mode by pr

essing the “PLAessing the “PLA

essing the “PLA

Y”Y”

Y”

and “ESCAPE” switches a second time.and “ESCAPE” switches a second time.

and “ESCAPE” switches a second time.

10.)10.)

10.)

Each time when you use PrEach time when you use Pr

Each time when you use Pr

o To T

o T

ools you should have MotorMixools you should have MotorMix

ools you should have MotorMix

powerpower

power

ed up first to insured up first to insur

ed up first to insur

e that MotorMix gets a completee that MotorMix gets a complete

e that MotorMix gets a complete

update of your most rupdate of your most r

update of your most r

ecent session settings.ecent session settings.

ecent session settings.