Specifications

TH82 Series Reference Manual
62/62
GS b Turn smoothing mode on/off
[FORMAT] <1D>H<62>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Turns smoothing mode on or off.
When n = <*******0>B, smoothing mode is turned off.
When n = <*******1>B, smoothing mode is turned on.
[DETAILES] *Only the lowest bit of n is effective.
*Smoothing mode is available for built-in, download characters.
*Even if smoothing mode is turned on, smoothing is not processed when each of character width or
character height is the normal size.
[DEFAULT] n=0
GS f Select font for HRI characters
[FORMAT] <1D>H<66>H<n>
[RANGE]
0≦n≦1H
30≦n≦31H
[FUNCTION] Selects a font for the HRI characters when printing a bar code.
n = 0, 30H: font A
n = 1, 31H: font B
[CAUTION] *HRI is Human Readable Interpretation.
*HRI characters are printed at the position specified by GS H.
[DEFAULT] n=0
GS h Select bar code height
[FORMAT] <1D>H<68>H<n>
[RANGE]
1≦n≦255
[FUNCTION] Selects the bar code height.
*n = the number of dots in the vertical direction.
[DEFAULT] n=162
This command is invalid.