Specifications

TH82 Series Reference Manual
54/54
GS H Select printing position of HRI characters
[FORMAT] <1D>H<48>H<n>
[RANGE]
0≦n≦3, 48≦n≦51
[FUNCTION] *Selects the printing position of HRI characters when printing a bar code.
*n = 0,48: Not printed.
*n = 1,49: Above the bar code.
*n = 2,50: Below the bar code.
*n = 3,51: Above and below the bar code.
[DEFAULT] n=0
GS I Transmit printer ID
[FORMAT] <1D>H<49>H<n>
[RANGE]
1≦n≦3, 49≦n≦51
[FUNCTION] *Transmits the printer ID specified by n after executing this command.
n Printer ID Specification
1,49 Printer model ID Depends on the model
2,50 Type ID See below table
3,51 ROM version ID Depends on the ROM version
*Type ID as follows.
Value
Bit Function
0 1
0 Two byte character code Not supported Supported
1 Autocutter Not equipped Equipped
2 Undefined Fixed to 0.
3 Undefined Fixed to 0.
4 Undefined Fixed to 0.
5 Undefined Fixed to 0.
6 Undefined Fixed to 0.
7 Undefined Fixed to 0.
*When DTR/DSR control is selected, the printer transmits the printer ID after confirming that the
HOST is ready to receive data. If the HOST is not ready to receive data, the printer waits until the
HOST is ready.
*XON/XOFF control is selected, the printer transmits the printer ID continuously without
confirming that the HOST is ready to receive data.