Specifications

TH82 Series Reference Manual
5/5
1 CHAPTER 1 SET UP
1.1 UNPACKING
Check for the following items in your box.
1 thermal printer
2 roll paper
3 AC adapter
4 AC cord
1.2 PRINTER COMPONENTS
PRINTER COVER
COVER OPEN KNOB CONTROL PANEL
PAPER CUTTER COVER
POWER SWITCH
Before connecting any of the cables, please turn off the HOST device.
1.3 ATTACHING INTERFACE CABLE TO THE PRINTER
You need an appropriate interface cable. Refer to section 5.3.1 on page 13 for cable details.
1: Plug the cable into the interface connector located on the back of the printer, as indicated below.
2: Firmly tighten the screws on both sides of the connector.
3: Attach the other end of the cable to the HOST.