Specifications

ManualsBrandsClover ManualsComputer equipmentTH82

TH82 Series Reference Manual

49/49

FS W Turn quadruple-size mode on/off for Kanji character

[FORMAT] <1C>H<57>H<n>

[RANGE]

0≦n≦255

[FUNCTION] *Turns quadruple-size mode on or off for Kanji characters specified by n.

Value

Bit Function

0 1

0 Quadruple character OFF ON

1 Undefined - -

2 Undefined - -

3 Undefined - -

4 Undefined - -

5 Undefined - -

6 Undefined - -

7 Undefined - -

[CAUTION] *Only the lowest bit n is valid

*Quadruple-size mode is the character which double-width and double-height modes are both

selected at the same time.

*When quadruple-size mode is turned off by this command, the following character are printed in

normal size.

*If some of the different characters in height are on a line, all the characters on the line are aligned at

the baseline.

*When the size of the character is enlarged to the horizontal direction, it is enlarged to the right

based on the left side of the character.

*The setting of the last received command is effective although FS ! can turn on or off

quadruple-size mode by selecting double-height and double-width modes. Thus, if the printer

cancels quadruple-size mode by FS W after specifies quadruple by FS !, it clears the setting of FS !.

FS k Select Kanji character font(Japanese model only)

[FORMAT] <1C>H<6B>H<n>

[RANGE]

0≦n≦1

[FUNCTION] *Selects Kanji character font specified by n.

Value

Bit Function

0 1

0 Selects Kanji font Mintyo Gothic