Specifications

TH82 Series Reference Manual
48/48
FS C Select Kanji character code system (Japanese model only)
[FORMAT] <1C>H<43>H<n>
[RANGE] n=0,1,48,49
[FUNCTION] Selects a Kanji character code system.
n Selection
0,48 JIS code system
1,49 SHIFT JIS system
[DETAILES] *In the JIS code system, the available codes are as follows and this command is valid only on
Japanese mod el.
The first byte: <21>H∼<7E>H
The second byte : <21>H∼<7E>H
*In the SHIFT JIS code system, the available codes are as follows.
The first byte: <81>H∼<9F>H and <E0>H∼<EF>H
The second byte : <40>H∼<7E>H and <80>H∼<FC>H
[CAUTION] *For Japanese model only.
[DEFAULT] n=0
FS S Set the space amount of Kanji character
[FORMAT] <1C>H<53>H<n1><n2>
[RANGE]
0≦n1,n2≦32
[FUNCTION] Sets left (n1) and right (n2) side Kanji character spacing.
24
All
n1 n2
[CAUTION] *When double-width mode is set the left and right side character spacing is twice the normal value.
[DEFAULT] n1,n2=0