Specifications

TH82 Series Reference Manual
46/46
FS - Turn underline mode on/off for Kanji character
[FORMAT] <1C>H<2D>H<n>
[RANGE]
0≦n≦2, 48≦n≦50
[FUNCTION] Turns underline mode on or off for Kanji characters.
n Function
0,48 Turns off underline mode for Kanji characters.
1,49 Turns on underline mode for Kanji characters with 1 dot thick
2,50 Turns on underline mode for Kanji characters with 2 dot thick.
[CAUTION] *The printer can underline all characters including right and left side character spacing, FS S, but
cannot underline the space set by horizontal tab, HT and 90°clockwise rotated characters, ESC V.
*When the underline mode for Kanji characters is turned off by n = 0, the printer no longer
underlines the data following but the previously specified underline thickness is stored. The default
underline thickness is 1 dot.
*The specified underline thickness does not change, regardless of the character size.
*This command is not effective on ANK characters.
a: .Select print mode (ESC !)
b.: Turn underline mode on/off (ESC -)
*It is possible to turn underline mode on or off by specifying Kanji character print mode, FS !, but
the last received command is effective. Thus, if the printer turns off underline mode by FS - after
turns on by FS !, it clears the setting of FS !.
FS . Turn Kanji character mode off
[FORMAT] <1C>H<2E>H
[RANGE] -
[FUNCTION] Turns Kanji character mode off.
[CAUTION] [For Japanese model]
*The printer processes all the following data as one byte code.
*Kanji character is off by default.
[For Chinese or Korea model]
*When Kanji character mode is off, all character codes are processed as single byte ASCII codes.
*Kanji character is on by default.