Specifications

TH82 Series Reference Manual
34/34
ESC c 4 Select paper sensor to stop printing (Near-end sensor model only)
[FORMAT] <1B>H<63>H<34>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Selects the paper sensor to stop printing when a paper near end is detected.
VALUE
BIT FUNCTION
0 1
0 Paper roll near end sensor. Disabled. Enabled.
1 Undefined. - -
2 Undefined. - -
3 Undefined. - -
4 Undefined. - -
5 Undefined. - -
6 Undefined. - -
7
Undefined. - -
*This function is valid only on near-end sensor model .
[DEFAULT] n=0
ESC c 5 Enable/disable panel switches
[FORMAT] <1B>H<63>H<35>H<n>
[RANGE]
0≦n≦255 n is valid only in the lowest bit.
[FUNCTION] n=<*******0>B The panel switches are enabled.
n=<*******1>B The panel switches are disabled
[DEFAULT] n=0
ESC d Print and feed n lines
[FORMAT] <1B>H<64>H<n>
[RANGE]
1≦n≦255
[FUNCTION] Prints the data in the print buffer and feeds n lines.
ESC i Full cut (one point left uncut)
[FORMAT] <1B>H<69>H
[RANGE] -
[FUNCTION] Sets full cut. (one point left uncut)
[CAUTION] *Paper must be fed 3 mm after printing to prevent paper jam.