Specifications

TH82 Series Reference Manual
28/28
n=<*******0>B Double-strike mode is turned off.
n=<*******1>B Double-strike mode is turned on.
[DETAILES] *n is valid only for the lowest bit.
*Printer output is all the same with emphasized mode.
[DEFAULT] n=0 (double-strike mode off)
ESC J Print and feed paper
[FORMAT] <1B>H<4A>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Prints the data in the print buffer and feeds the paper [n x vertical or horizontal motion unit].
ESC L Select page mode
[FORMAT] <1B>H<4C>H
[FUNCTION] Switches from standard mode to page mode.
[DETAILES] *This command is enabled only when processed at the beginning of a line in standard mode.
*This command is ignored in page mode.
*The printer returns to standard mode after printing by FF is completed or by using ESC S.
*This command sets the position where data is buffered to the position specified by ESC T within
the printing area defined by ESC W.
*This command switches the setting for the following commands which have each value
independently in standard mode and page mode to those for page mode.
□Set right-side character spacing: ESC SP, FS S
□Set default line spacing: ESC 2、ESC 3
*Only setting is possible for the following commands in page mode.
① ESC V Turn 90°clockwise rotation mode on/off.
② ESC a Select justification.
③ ESC { Turn upside-down printing mode on/off.
④ GS L Set left margin.
⑤ GS W Set printing area width
*The following command is not available in page mode.
① FS p Print NV bit image.
② FS q Define NV bit image.
③ FS g1 Write to NV user memory.
④ GS v 0 Print raster bit image.
*The printer returns to standard mode when ESC @ is used.
ESC M Select character font
[FORMAT] <1B>H<4D>H<n>
[RANGE] n=0,1,48,49
[FUNCTION] Selects character fonts.
n Function
0,48 Font A (12 x 24) selected.