Specifications

TH82 Series Reference Manual
27/27
[CAUTION] *The DIP switch settings are not checked again.
*The data in the receive buffer is not cleared.
*The macro definition is not cleared.
*The NV bit image data is not cleared.
ESC D Set horizontal tab positions
[FORMAT] <1B>H<44>H[d1...dk]<00>
[RANGE]
0≦d≦FFH 1≦k≦32
[FUNCTION] Sets horizontal tab positions.
[CAUTION] *d specifies the column number.
*k indicates the total number of horizontal tab position
*The horizontal tab position is set at position where it is [character width x the column number]
from the beginning of the line.
*The horizontal tab position does not change even if the character width is altered after setting the
horizontal tab position.
*Set d in ascending order.
*ESC D 00h cancels all horizontal tab positions.
*Data exceeding 32 tab positions is ignored.
[DEFAULT] Intervals of 8 characters.
ESC E Turn emphasized mode on/off
[FORMAT] <1B>H<45>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Turns emphasized mode on or off.
n=<*******0>B Emphasized mode is turned off.
n=<*******1>B Emphasized mode is turned on.
[DETAILES] *n is valid only for the lowest bit.
*Emphasized mode can be turned on and off by ESC ! as well but the last received command is
effective.
[DEFAULT] n=0 (emphasized mode off)
ESC G Turn double-strike mode on/off
[FORMAT] <1B>H<47>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Turns double-strike mode on or off.