Specifications

TH82 Series Reference Manual
26/26
[CAUTION] *n1 is the total block number of logo pattern which should be set.
Block number 1(n2)
Total bock number(n1)
Block number N-1
Block number N
･n2is the block number which should be set.
･data1 – data720 sets logo pattern data.
MSB LSB
1 8 9 16 17 713 720
d1 d2 d71 d72 1dot line
d72 d74 d143 d144 2dot line
d713 d714 d719 d720 10dot line
ESC = Set peripheral device
[FORMAT] <1B>H<3D>H<n>
[RANGE]
0≦n≦255
[FUNCTION] n=<******0>B：printer disabled, ignores all data.
n=<******1>B：Printer enabled.
ESC ? Cancel download characters
[FORMAT] <1B>H<3F>H<n>
[RANGE]
32≦n≦126
[FUNCTION] Cancels download characters.
[CAUTION] *n is the character code which cancels the defined pattern. After the download characters are
canceled, the pattern for the internal character is printed.
*This command deletes the pattern defined for the specified code in the font selected by ESC !.
*If a download character has not been defined for the specified character code, the printer ignores
this command.
*If n is out of the range, the printer ignores this command.
ESC @ Initialize printer
[FORMAT] <1B>H<40>H
[RANGE]
32≦d≦126
[FUNCTION] Clears the data in the print buffer and initializes the printer mode which set by the software.