Specifications

TH82 Series Reference Manual
23/23
[FUNCTION] Sets the distance from the beginning of the line to the position at which subsequent characters
should be printed. The distance from the beginning of the line to the print position is (nl + n2x256) x
(vertical or horizontal motion unit).
[CAUTION] Setting outside the printable area are ignored.
ESC % Specify/cancel download character set
[FORMAT] <1B>H<25>H<n>
[RANGE]
0≦n≦1
[FUNCTION] n=0 Internal character set is specified.
n=1 Download character set is specified.
[DEFAULT] n=0
ESC & Define download characters
[FORMAT] <1B>H<26>H<s><c1><c2>[x1 d1...dn]...[xk d1...dn]
[RANGE] s=2, 3 The number of bytes in the vertical direction.
(2: font B, 3: font A)
20H≦c1≦FEH The beginning character for the definition.
20H≦c2≦FEH The final code for the definition.
x=12 The number of dots in the horizontal direction when font A is selected.
x=8 The number of dots in the horizontal direction when font B is selected.
0≦d≦FFH The dot data for the character.
[FUNCTION] Defines download characters.
12 x dot
D1 D4 D7 ― ― ― ― ― ― ― ―
MSB
LSB
D2
D5 D8 ― ― ― ― ― ― ― ―
MSB
LSB
D3 D6 D9 ― ― ― ― ― ― ― ―
MSB
LSB
*When font A is selected.
[CAUTION] *Font A and font B cannot be defined simultaneously.
ESC * Specify the bit-image mode
[FORMAT] <1B>H<2A>H<m><n1><n2>[d1...dk]
[RANGE] m=0､1､32､33 Mode
0≦n1≦FFH Low 8 bits of the number of printing dot.