Specifications

TH82 Series Reference Manual
22/22
ESC FF Print data in page mode
[FORMAT] <1B>H<0C>H
[FUNCTION] Prints all buffered data in the printing area collectively in page mode.
[DETAILES] *This command is enabled only in page mode.
*After printing, the printer keeps the buffered data, setting values for ESC T and ESC W, and the
position for buffering character data.
ESC SP Set the right space amount of the character
[FORMAT] <1B>H<20>H<n>
[RANGE]
0≦n≦255
[FUNCTION] Sets the character spacing for the right space amount of the character to [n x horizontal or vertical
motion units].
[CAUTION] *This command does not affect setting Kanji characters.
*The right space amount in double wide mode is twice the set volume.
*This command can set value indepently in each mode of standard and page modes.
[DEFAULT] n = 1
ESC ! Select print mode
[FORMAT] <1B>H<21>H<n>
[RANGE]
0≦n≦FFH
[FUNCTION] *Selects print mode collectively.
*Selects print mode using n as follows.
VALUE
BIT Function
0 1
0 Character font Font A Font B
1 Character font
（De
p
end on bit 0）
Font B
2 Undefined
3 Emphasizing Cancelled Selected
4 Double-height Cancelled Selected
5 Double-width Cancelled Selected
6 Undefined
7 Underline Cancelled Selected
[DEFAULT] n=0
[CAUTAION] *Specification with double-height and width, and underline are invalid to Kanji.
*Character font can be changed at the beginning of a line only.
ESC $ Set absolute print position
[FORMAT] <1B>H<24>H<n1><n2>
[RANGE]
0≦n1≦FFH
0≦n2≦FFH