Specifications

TH82 Series Reference Manual
16/16
6 CHAPTER 6 COMMANDS
6.1 COMMAND TABLE
COMMAND
COMMAND NAME
TH-82
TH-200
EXECUTING
SETTING
STANDARD
MODE
PAGE
MODE
HT Horizontal tab
○○ ○ ○
FF
Print in page mode and return to standard mode
○○ - ○
CR Carriage return
○*
○ ○
LF Print and line feed
○○ ○ ○
DLE NUL Clear
○ ○
DLE ENQ Real-time request to printer
○○ ○ ○
DLE DC4 Real-time pulse output
○○ ○ ○
DLE EOT Real-time status transmission
○○ ○ ○
CAN Cancel print data
○○ - ○
ESC FF Print data in page mode
○○ - ○
ESC SP Set the right space amount of the character
○*
○ ○
ESC ! Select print mode
○○ ○ ○
ESC $ Set absolute print position
○*
○○ ○ ○
ESC % Specify/cancel download character set
○○ ○ ○
ESC & Define download characters
○○ ○ ○
ESC * Specify the bit-image mode
○○ ○ ○
ESC - Turn underline mode on/off
○○ ○ ○
ESC 2 Specify 1/6-inch line spacing
○○ ○ ○
ESC 3 Set line spacing
○*
○ ○
ESC 4 Set logo pattern data
○ ○
ESC = Set peripheral device
○○ ○ ○
ESC ? Cancel download characters
○○ ○ ○
ESC @ Initialize printer
○○
ESC D Set horizontal tab positions
○○ ○ ○
ESC E Turn emphasized mode on/off
○○ ○ ○
ESC G Turn double-strike mode on/off
○○ ○ ○
ESC J Print and feed paper
○*
○○ ○ ○
ESC L Select page mode
○○ (Line) -
ESC M Select character font
○○ ○ ○
ESC R Select an international character set
○○ ○ ○
ESC S Select standard mode
○○ -
ESC T Select print direction in page mode
○○ (Set)
ESC V Turn 90° clockwise rotation mode on/off
○○ ○ ○ (Set
)
ESC W Set printing area in page mode
○*
(Set)
ESC
Set relative print position
○*
○○ ○ ○
ESC a Select justification
○○ (Line) (Set)
ESC c 3 Select effective paper sensors
○○ ○ ○
ESC c 4 Select paper sensor to stop printing
○○ ○ ○
ESC c 5 Enable/disable panel switches
○○ ○ ○
ESC d Print and feed n lines
○○ ○ ○
ESC i Full cut
○○ (
L
ine)
ESC k Select characters (ANK)
○ ○
ESC m Partial cut
○○ (Line)
ESC o Print logo pattern
-
ESC p Generate pulse
○○ ○ ○
ESC t Select character code table
○○ ○ ○