Specifications

- 40 -
4. Networking
4.1 Requirement
 C1704DVR
 PC
Required Specifications
1. OS: Microsoft Windows 2000, Windows XP
2. CPU: PENTIUM-4 1.8GB or higher
3. MEMORY: 512Mb
4. 1024x768 Display Resolution
5. 32 Bit Color
6. Internet or LAN connection
7. TCP/IP installed
 Cable
1. Direct connection to PC: Twist cable (Cross Over)
2. Connection Via hub or router: Direct cable
 IP address or ID and Password of DDNS
 Client Program (Supplied with C1704DVR)
4.2 Installing the program to the PC
 Install the program on the PC by using the program CD (supplied) as follows.
► How to install the host program
1. Start the operating system (Windows 2000 or Windows XP)
2. Insert the program CD into the CD-ROM drive.
3. Open My Computer, and then select CD-ROM drive.
4. Select the DvrAdmin folder, and then double-click SetupDvrAdmin.EXE. The software installation
will begin.
5. After the installation has been completed, the program icon will be created on your desktop
screen.
6. Double-click the program icon, and the program GUI appears.
4.3 Cable Connection
 Connect the cables between the SYSTEM and PC (directly or indirectly via hub). The link LED
lamps on PC and system will be lit when the cable is correctly connected. If not, please check the
connection and try again. If the problem persists, please contact your installer or your local
distributor.