INSTRUCTION MANUAL MINI COLOR DOME CAMERA MODEL HDC365 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
PRECAUTIONS • • • • • • • • To prevent fire or shock hazard, do not expose the product to rain or moisture. To avoid electrical shock, do not open the case of this product. Operate this product using only the supplied AC Power supply. Do not overload electrical outlets or extension cords; this can result in fire or electric shock. Keep this product away from strong magnetic fields. Do not expose this product in direct sunlight or strong reflected rays. Refer servicing to qualified personnel only.
Note: ▪ Apply the provided AC power supply only. ▪ The total length of cable must not exceed 300’ including extension cable. TROUBLE SHOOTING If the camera does not function properly, check the following points before contacting the service center.
SPECIFICATIONS • • • • • • • • • • • • • • • • • Image sensor Effective Pixels Scanning system Sync system Resolution S/N Ratio Min.illumination Gamma characteristic Video output Electronic shutter speed Voltage Current consumption Lens Operating temperature/Humidity Storage temperature/Humidity Dimensions Weight 1/3” SONY Super HAD CCD 768(H) x 494(V) 2:1 Interlace Internal 540TV Lines More than 46dB 0.1Lux r=0.45 CVBS:1.0Vp-p 75 ohm 1/60sec to 1/100,000sec DC12V 80 mA 4mm fixed board lens -10°C ~ +50°C.
HOW TO OBTAIN FACTORY SERVICE 1. Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase. 2. We will repair or replace, and return to the owner the system under this limited warranty. 3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703. 4. Please include a check for $15.00 to cover the cost of return postage and handling.
