Instruction manual

Page 51 of 69
 Storage - Record
Record Duration
You can configure Record time using the options below:
▪ Continuously
▪ 30 / 60 / 90 days
▪ User Defined
Write Mode
There are two mode options.
▪ Overwrite: Old data on the HDD will be erased when the HDD is full.
▪ Suspend: Recording is stopped when the HDD is full.
Early Warning
HDD warning will be issued if remaining HDD capacity is less than the selected limit.
From 5% to 30% are available.
 Storage - Backup
 Refer to “Backup” section in Chapter 3. Operation.