INSTRUCTION MANUAL Stand-Alone 8 & 16Channel DIGITAL VIDEO RECORDER MODEL DV0890, DV1690 Ver. 010313 Copyright © 2011 Clover Electronics U.S.A. All Rights Reserved.
DIGITAL VIDEO RECORDER MANUAL Preface This manual contains user instruction on how to operate the Digital Video Recording device (DVR Unit), Remote Controller, Client Application, Mobile Application and Central Monitoring Software Application. This manual also contains cautions and notification regarding safe operating parameters to protect the equipment and equipment operator. Please read this manual and comply with its suggested guidelines for proper operation of this equipment.
DIGITAL VIDEO RECORDER MANUAL Warning Check if the power is switched off before installation. Check if the power is switched off before installation Don’t plug in at the same time. Otherwise it may be or additional repair. Never plug in while the device is set on fire or put you at the risk of electrocution or in operation. Otherwise it might be set on fire or put damage. you at the risk of fire, electrocution and damage.
DIGITAL VIDEO RECORDER MANUAL Caution Do not install the device in any place where strong Do not put anything heavy on the magnetic flow, electric wavelength and vibration may Otherwise it may be the cause of disorder. product. be sensed or where radio, TV or other wireless device is located. Keep the device away from magnetic flow, electric wave or vibration. Strong shockwave or vibration may be the cause of Be careful so that anything conductive may not fall mechanic disorder.
DIGITAL VIDEO RECORDER MANUAL TABLE OF CONTENTS 1. Summary ∙ Feature ……………………………………………………………………………………………….………………………..……………….8 2. Installation ∙ Contents ………………………………..…………………………………………………………………….…………………………………..9 ∙ Front panel ………………………………………………………………………………………………………………………..……….….10 ∙ Rear panel.………………………………………………………………………………………………………………………………………11 3. System Operation ∙ Icon………………………………………………………………………………………………………………………………………..…..…..…12 ∙ Remote Controller…………………………………………………………………………….………………………………………..…..
DIGITAL VIDEO RECORDER MANUAL 7. Camera Setup ∙ Camera ……………….………………………………………………………………………..…………………………………..…………..…36 ∙ Camera Title……….………………………………………………………………………..…………………………………..…………..…36 ∙ PTZ Setting………….….……………………….………………………………………………………………………………………...……37 ∙ How to use PAN/TILT….….……………………….………………………………………………………………………………...……39 8. Record ∙ Record Setup…………………………..……….……………………………………………………………………….…………………….41 ∙ Schedule Record..……………………..……….…………………………………………………………….………….………………….42 ∙ Holiday Record..…...
DIGITAL VIDEO RECORDER MANUAL 1 — Summary Feature This Stand Alone Digital Video Recorder is capable of high quality of video and audio data recording and provides various ways of data search by Calendar, Date/Time and event. Also the system allows remote user to access in order to monitor and control multiple local DVRs via TCP/IP / LAN connection.
DIGITAL VIDEO RECORDER MANUAL 2 — Installation Contents HDD fixing screw (8PCS) Battery for remote Program CD controller Size : AAA 1.5V X 2EA MANUAL Power Adapter POWER CODE Remote controller Accessories. ㆍ Digital Video Recorder (1EA) ㆍ HDD Fixing screw (8pcs) ㆍ Program CD (1EA) ㆍ Manual (1EA) ㆍ Power code (1EA) ㆍ Remote controller) ㆍ Battery AAA (1.5V 2EA) ㆍ Adaptor (1EA) [Note] Check the accessories before use.
DIGITAL VIDEO RECORDER MANUAL Front panel (DV0890) [1] POWER LED [2] RECORD LED [3] MENU Button [4] QUAD Button [5] REC Button (Emergency / Schedule) [6] USB Port (DV1690) [1] POWER LED [2] RECORD LED [3] USB Port [5] QUAD Button [4] MENU Button [6] REC Button (Emergency / Schedule) DIGITAL VIDEO RECODER MANUAL 9
DIGITAL VIDEO RECORDER MANUAL Rear panel (4Ch DVR) (8Ch DVR) (16Ch DVR) DIGITAL VIDEO RECODER MANUAL 10
DIGITAL VIDEO RECORDER MANUAL [1] AUDIO OUTPUT [2] AUDIO INPUT [3] VIDEO INPUT [4] VIDEO OUTPUT (COMPOSITE) [5] VGA OUTPUT [6] ETHERNET PORT (RJ-45) [7] USB PORT (USB Drive / Mouse) [8] RS-485/ALARM/SENSOR [9] POWER (ADAPTER) 3 — System Operation Icon [1] The icons on the live screen indicate the status.
DIGITAL VIDEO RECORDER MANUAL [2] Camera title will be shown as above. [3] Recording Status Icon Recording. Video Loss. Motion Detection. Sensor.
DIGITAL VIDEO RECORDER MANUAL [4] Status Bar 1. Date / Time 2. Record mode : Emergency recording - “ER”, Scheduled recording - “SR”. 3. Key Lock / Network Connectivity status. 4. Hard Disk status. Remote Controller [1] ID (Remote controller ID) : Press to select a remote controller ID in case of using one remote controller to multi DVRs. [2] SPLIT : Press to see split mode. Once press “▲” button, split mode can be changed and press “▶” button to change channel group.
DIGITAL VIDEO RECORDER MANUAL [5] SEQ (Sequence) : Press to display each camera in sequence for specific duration. [6] PTZ : Call PTZ control menu. [7] SEARCH : Call search menu to playback recording image. [8] CHANNEL / NUMERIC BUTTON : Input the channel number to make full screen mode or the number in setup menu. [9] SETUP : Press to call setup menu [10] DIRECTION KEY / CONFIRM BUTTON / PLAYBACK CONTROL [11] REC : Select recording mode.
DIGITAL VIDEO RECORDER MANUAL [2] How to use remote controller ID must be identified between remote controller and system. Otherwise remote controller cannot recognize DVR correctly. [3] Remote controller ID menu displays as above image when you click ID button of remote controller. ∙ Remote ID : It displays current ID of the system.
DIGITAL VIDEO RECORDER MANUAL [3] Language : Select a language [4] Version : To show H/W Version and S/W Version [5] Health: Indicates storage status • HardDisk1 : Temperature of HDD. • Front USB : Temperature of external storage with front USB port. • Rear USB : Temperature of external storage with rear USB port. [6] Video Detect Mode : Select a video signal format. (NTSC / PAL) [7] Video Mode : Display video signal format [8] WEB Code : DDNS ID for DDNS connection.
DIGITAL VIDEO RECORDER MANUAL [3] Date Format : Select a Time / Date display format. [4] Daylight Saving Time : It is commonly called as “Summer time”. During the period, user can change system time 1 hour early or late. [5] Time Server : It helps time set of DVR automatically by synchronization of time server service. • Time server : Input the URL of server (Default : kr.pool.ntp.org ) • Synchronize Period : Select the period to syncronize between DVR and time server ㅇ Power On : Try to sync once power on.
DIGITAL VIDEO RECORDER MANUAL [3] Function : Assign user’s function on each account. ㅇ Configuration ㅇ HardDisk ㅇ Search ㅇ Backup ㅇ PTZ Setting ㅇ Record Key ㅇ Camera Hard Disk It is the HDD and ODD setup. Since it is closely related to the record, if the setup is wrong, it may cause the mal functioning. [1] Hard Disk List : It shows the HDD information ㅇ Hard Disk1 : Capacity of hard disk drive ㅇ Front USB : Capacity of external drive on front USB port.
DIGITAL VIDEO RECORDER MANUAL [NOTE] “Mirro Disk” or “RW Writer” purpose is able to setup when the external device is connected with DVR via USB port. Default Setup [1] Default Setup : Except major configuration (Network, Password), parameters are initialized. [2] Factory Setup : All parameters are initialized. Upgrade [1] USB In order to upgrade system firmware with USB memory stick, the firmware file must be saved in the USB storage first and then insert to DVR to start USB upgrade from the menu.
DIGITAL VIDEO RECORDER MANUAL Firmware USB Memory Stick [NOTE] Do not turn off power or remove USB stick while the upgrade is in progress. [2] Configuration Backup : Save a configuration file of DVR. [3] Configuration Load : Upload a configuration file to DVR. Button Setup • Auto key lock : There is no key input during specific time, system locks the button automatically. In order to unlock, input the password. ( 10 sec. 30 sec. 1 min.
DIGITAL VIDEO RECORDER MANUAL RS-485 In order to control the PTZ camera or control keyboard, DVR supports RS-485 port. √ Baudrate /Parity /Stopbit : For using RS-485 port, refer to the manual of “Keyboard” or “PTZ camera”.
DIGITAL VIDEO RECORDER MANUAL [1] Camera Title : ON / OFF [2] Status Bar : ON / OFF. [3] Multi screen Border : ON / OFF [4] Login Display : Select a login option • As Per Last Login : Display live image after system rebooting. • Cover All Camera : Do not display live image after system rebooting. [5] Log in menu : Select a log in option. • Always from boot : Input the password after rebooting. • Boot after lock : Auto login after rebooting.
DIGITAL VIDEO RECORDER MANUAL [6 Split] Displayed in 8/16 [9 Split] Displayed in 8/16ch .
DIGITAL VIDEO RECORDER MANUAL [16 Split] Displayed in 16 [Note] Various split screen switch If you press UP direction key in live mode, the split mode is changed. And if you press the RIGHT direction key, the split group is changed. (There is 1ch full screen and 4 split in 4ch DVR.) Auto Sequence • Auto Loss Skip : If there is no video input, it skip video loss channel. • Display time : Select a display duration while sequencing (1 sec. ~30 sec.
DIGITAL VIDEO RECORDER MANUAL TV Adjustment [1] Monitor : Output is fixed with 4:3 ratio. [2] Icon : Change the icon position. • Small : When using small monitor. • NORMAL : When using normal monitor • VGA : When using the monitor for VGA 6 — NETWORK SETUP IP Address It is the system setup for remote monitoring or backup and it needs the network setup of DVR. The user must know whether their internet is dynamic IP(DHCP) or fixed IP. Please check it to your ISP before setup.
DIGITAL VIDEO RECORDER MANUAL [2] IP Address : Input the IP address. [Example] • IP address : 61.250.152.050 • Subnet Mask : 255.255.255.000 • Gateway : 61.250.152.001 • DNS Address : 164.124.101.002 [3] DDNS Address : Do not change the DDNS server IP (61.250.157.14) [4] Use Port : Default port is 3000. [5] Upnp : If a router supports Upnp, it automatically set port forwarding. [NOTE] In case of using the router, the user should make port forwarding.
DIGITAL VIDEO RECORDER MANUAL [1] SMTP SERVER : Designating the mail server sending a mail. Input the mail server address a user uses. [2] Use Port : Mostly 25 is used to a mail server. Check the port when it doesn’t work after Setup. [3] Mail Address : Input the e-mail address of receipts (Available up to max 3 people) [4] Password : When sending an e-mail in case ID & password input are necessary, set the ID & password.
DIGITAL VIDEO RECORDER MANUAL Web Server Built-in web server make user can connect the DVR remotely on the Internet Explorer. [1] ON/OFF : Select ‘ON’ to use remote N/W connection through web. [2] USE PORT : Port for remote connection. [Example] In case of using IP 61.250.157.50 and Port 2001, type http://61.250.157.50:2001 on the address input of browser. Free DDNS Free DDNS is used for remote connection through private DDNS service. Firstly, go to http://www.dyndns.com and create an account.
DIGITAL VIDEO RECORDER MANUAL [1] For creating an account, visit the website: http://www.dyndns.com [2] After creating sub domain name(example:dvr-sample), select the main domain name using with free. A user can select any domain name convenient to oneself. Then, click the “ADD” button. [3] Then, input the detailed user information. After filling in user name, password and email address, etc., then click “Create Account” button. For e-mail verification, receivable email address is required.
DIGITAL VIDEO RECORDER MANUAL [4] When you see that the e-mail has been sent to you for verification, then check the e-mail. [5] After opening the verification e-mail, if you click the linked part, the verification is proceeded automatically.
DIGITAL VIDEO RECORDER MANUAL [6] If the e-mail verification is completed, you are entered into following website. [7] After log-in, click “My Zones/Domains” in “My Service” menu [8] Then, click “Dynamic DNS Hosts” in the menu on the left.
DIGITAL VIDEO RECORDER MANUAL [9] Click the firstly registered domain(dvr-sample.dyndns-ip.com) [10] Input the public IP of installed router for IP Address. You can find the public IP of the router when you check the router setup. When you complete the input, click “Save Changes”. [11] To activate the registered domain, click “Checkout to Activate.
DIGITAL VIDEO RECORDER MANUAL [12] Then, click “Proceed to checkout” button below. [13] And click “Activate Services” below. [14] Then, selected domain IP is activated. [15] Input registered information in DVR setup. • DDNS address : Select the private DNS service name (Select DyDns ) • User name/ Password/ DVR Address : After creating an account in the relevant website, input the ID/ Password/ URL information allocated to DVR setup.
DIGITAL VIDEO RECORDER MANUAL [16] If you input the registered domain in URL address of web browser, then the connection is made. Note : After making new account, the relevant service would be available after 10~30 minutes Dual Codec Setup It is a transmitting function through the extra network transmitting Codec. • On/ Off : If you want to use it, set ON.
DIGITAL VIDEO RECORDER MANUAL 7 — Camera Setup Camera • Channel : Select the channel to set • On/Off : Select whether you use the channel or not • Brightness / Contrast / Saturation / Hue : Adjust the image of the selected (Default : 50%) Camera Title Input a camera title Multi-language keyboard is supported DIGITAL VIDEO RECODER MANUAL 35
DIGITAL VIDEO RECORDER MANUAL PTZ Setting [1] Channel: Select a channel [2] ON/OFF : Enable or disable to use PTZ. [3] MODEL : Select the PTZ protocol or, model [4] ID : Select the PTZ ID. (For more detail, refer to the manual of PTZ device.) Advanced [1] Reverse Control (Pan) : Set the Pan works reverse direction. [2] Reverse Control (Tilt) : Set the Tilt works reverse direction. [3] Touring Mode • Preset Touring : Use touring by DVR setting. • Camera Touring : Use touring by camera setting.
DIGITAL VIDEO RECORDER MANUAL [4] Setup Preset Touring It is operable when you select the ‘preset touring’ from the touring mode’ menu. The touring number is selectable 1~16. [1] Touring number : Select the number. [2] Preset number : Select the preset number saved before. [3] Touring interval (/SEC) : Select the touring dwell time. [NOTE] PTZ protocol selection Protocol is PTZ moving driver. The protocol is registered as per the camera model name or protocol name.
DIGITAL VIDEO RECORDER MANUAL How to use PAN/TILT How to call the PTZ menu recall • Mouse menu: Click the right button of mouse and select the ‘PTZ’. • Remote controller menu: Click the “PTZ” from remote controller. (1) Select PTZ Button on the remote controller • When you select PTZ button, + shape icon appear. Then move to the channel you want by the direction key. (2) If you moved to PTZ channel, then after pushing “SET UP” button, select the menu to operate.
DIGITAL VIDEO RECORDER MANUAL [ PTZ control menu ] ㅇ PanTilt : Control the direction by the direction key in remote controller. ㅇ PRESET = Input the preset number to be moved or saved and select this menu. (Preset moving) (Preset saving) ㅇ Tour : It tours as per the saved preset number. ㅇ MENU : It can recalls the PTZ camera OSD menu ㅇ Channel: It is for changing the PTZ channel from the multi channel viewing.
DIGITAL VIDEO RECORDER MANUAL 8 — Record Record setup The record setup can be made as per the different channel such as different record frame and resolution etc. Since the file size is different from the record setup, you have to be careful when you make setup. (Channel display could be different per model 4ch/8ch/16ch) [1] Channel : It selects the channel. [2] ON/OFF : It selects the RECORD ON/OFF of each channel. [3] Resolution : It selects the resolution selection.
DIGITAL VIDEO RECORDER MANUAL Schedule Record For schedule recording, it can be setup as per the day/date/time and channel. The record schedule can be setup by an hour. N : No record C : Continuous record M : Motion detected record S : Sensor triigered record M+S : Motion or sensor record [How to setup] • Select the channel. • Once you select the day and time, whenever press “Confirm” button, event color is changed in this order. ( N-> C -.
DIGITAL VIDEO RECORDER MANUAL Holiday Record Different record can be applied as per different holiday. [1] 7 different holiday setup can be made. After selecting the recording type from H1 ~ H7, set by mouse dragging or direction key of remote controller [2] Select the Holiday from the menu and select the holiday type from H1~H7. Once you click the date, every times you click, the holiday color will be changed, which means the different record setup.
DIGITAL VIDEO RECORDER MANUAL 9 — Event Setup Sensor It is for sensor setup. (Channel display could be different per model 4ch/8ch/16ch) [1] Sensor Input : Select the sensor input channel. [2] On/Off : Select the sensor usage. [3] Input Type: Select the sensor input type. • N/Open (NORMAL OPEN) : The contact is normally opened but closed when the signal is generated. • N/Close (NORMAL CLOSE) : The contact is normally closed but opend when the signal is generated.
DIGITAL VIDEO RECORDER MANUAL ▷ Channel : Select the motion detection channel. ▷ On/Off : Select the motion detection usage. ▷ Sensitivity : Select the sensitivity of motion detection. Please apply it after the actual testing. ▷ Detection Area: Select the motion detection area. ( 1~5 ) The cursor moving by the direction key and if press “enter”, this block is designated for motion detection.
DIGITAL VIDEO RECORDER MANUAL [Using mouse] Locate the pointer on start point and click the right button then dragging to the ending point. CAMERA TEMPER DETECTION If there is the extra ordinary bright or, dark, it recognize as an event. If it turns bright by opening the door/window or if somebody painted the camera, it detects as an event. ( This function is operating by using the dual monitor and output is made through VGA) [1] Channel : Select the channel to use.
DIGITAL VIDEO RECORDER MANUAL [1] Motion : It is the setup for PTZ, pop-up, relay out, buzzer in motion detection • Channel : Select the channel to apply. • Preset channel : Select the preset camera being applied for the event. • Preset number : Select the preset number to move. • Popup Channel : Select the usage Popup usage by ON/OFF. • Popup Duration : Popup window floating time. • Relay out : Select the alarm out • Relay duration : Relay out duration. • Internal buzzer : Internal buzzer usage.
DIGITAL VIDEO RECORDER MANUAL [3] Video loss : It is the setup for PTZ, pop-up, relay out, buzzer in video loss. • Channel : Select the channel to apply. • Preset channel : Select the preset camera being applied for the event. • Preset number : Select the preset number to move. • Popup Channel : Select the usage Popup usage by ON/OFF. • Popup Duration : Popup window floating time. • Relay out : Select the alarm out • Relay duration : Relay out duration. • Internal buzzer : Internal buzzer usage.
DIGITAL VIDEO RECORDER MANUAL 10 — SEARCH Search It supports the various ways of search mode such as Calendar, Date/Time, Event, etc. [1] How to call menu : Select the “SEARCH” from remote controller and right button of mouse. [2] Search mode selection · Calendar search: It searches by calendar. · Date /Time search: It searches specific Date/Time. · Event search: It searches as per the event. · Go to first : It searches the first recorded data on HDD.
DIGITAL VIDEO RECORDER MANUAL [2] If there is the recorded data, it shows red color so, press the enter button on selected date. (Channel display could be different per model 4ch/8ch/16ch) [3] The recorded data shows as a graph and select the minutes to search.
DIGITAL VIDEO RECORDER MANUAL Date/Time search If you know the specific date/ Time, input the time to search. [1] Record begin : It shows the record began time. [2] Record end : It shows the record end time. [3] Channel : Select the channel to search. [4] Play Begin : Input the time to search. [5] Play : If you click “Play”, it playback the selected time. Event search It searches event recorded data.
DIGITAL VIDEO RECORDER MANUAL [6] If you select the event list from above, it shows playback. Go to first / Go to last It searches the first or last recorded image.
DIGITAL VIDEO RECORDER MANUAL you click it once again, it recognizes as a backup end time. After this, it moves to the backup menu automatically. [10] Screen magnifying function in the full screen. (Use Emergency recording button on the remote controller.) Audio Audio can be listened in Live or Search. [1] Menu recall : If you select the “AUDIO” during the live or playback, the audio out menu show up. The menu call is possible by remote controller or mouse. [2] Mode selection • OFF : No audio use.
DIGITAL VIDEO RECORDER MANUAL 11 — Backup Backup Selected image can be backup to the external device(USB). Connect the USB pen drive to the DVR and select ‘BACKUP’ button from remote controller or, click the right button of mouse. [1] Select the recognized backup device. If it recognized normal, it shows the device capacity such as ”XXX MB”. [2] Select the date from Calendar.
DIGITAL VIDEO RECORDER MANUAL [3] Select the time by double click. (Channel display could be different per model 4ch/8ch/16ch) [4] Select the minute. Once you select “--------“, the time will be automatically input. (Channel display could be different per model 4ch/8ch/16ch) [5] Backup end time selection • If the backup end time is the same hour, select the minute and click, “-------“, the time will be automatically input.
DIGITAL VIDEO RECORDER MANUAL (Channel display could be different per model 4ch/8ch/16ch) [6] Camera : Select the channel to be backup.( Selected channel will be shown as red) [7] Backup Start : If all setup is completed, click the ‘Backup start’ button then, backup starts. It shows the backup capacity/ USB pen drive capacity“ so, if everything is OK, click ‘OK’. [8] Before backup, it shows the USB port, backup time then, select OPTION.
DIGITAL VIDEO RECORDER MANUAL • Log Backup : The log file will be backup together. • Password : Backup data can be protected by the password. • Format Backup Disk : Select whether the viewer program will be backup together with data file. - Executable format : Viewer program will b backup together - Video Format : Only data file will be backup without viewer program [9] Backup Start : The backup start after click ‘OK’ [10] If the backup is completed, you will see the below icon as a file in USB stick.
DIGITAL VIDEO RECORDER MANUAL ① Scroll bar : It shows the current location from the total playback volume. ② Open : To open the other backup file. ③ Fast reverse playback ④ Reverse playback ⑤ One step reverse playback ⑥ Pause ⑦ One step playback ⑧ Playback ⑨ Fast playback ⑩ 4 split screen ⑪ 9 split screen ⑫ 16 split screen ⑬ Current image capture ⑭ When you convert it to AVI . You can click the ‘START’ and ‘END’ time(circled space) during playback and if you click ‘AVI’, it converts to ‘AVI’ file.
DIGITAL VIDEO RECORDER MANUAL 12 — Remote Connection-iPhone 12-1 Program Installation Go to Apple Store website and search and download MPRMS. Then install the MPRMS. 12-2 Program Execution When the installation is completed, the following icon is created. Select the Icon and execute it. 12-3 Product Information Registration Input network information in order to access the DVR a user has.
DIGITAL VIDEO RECORDER MANUAL [1] New Registration Execute the program on iPhone and click the new button for new registration. [2] Input Reg Name Any name is available to use for Reg Name.
DIGITAL VIDEO RECORDER MANUAL [3] Model name selecting If it is DVR you would use, select DVR.
DIGITAL VIDEO RECORDER MANUAL [5] DVR IP input (Only for static IP user) Dynamic IP user doesn’t make DVR IP input. (Note) As for Static IP, input the IP address registered on DVR. [6] DDNS IP Setup (Only for Dynamic IP user) Static IP user sets it with NO USE Dynamic IP user sets it with USE DDNS ID : Input the web code allocated to each DVR. (Note : A user should keep their basic setting for DDNS IP and DDNS PORT.
DIGITAL VIDEO RECORDER MANUAL [7] DDNS IP setup (Only for dynamic IP user) After completing all the inputs, push ADD button then the settings are saved. 12-4 Live Viewing [1] Click the registered DVR name.
DIGITAL VIDEO RECORDER MANUAL [2] Remote connection For channel selection, click CH SELECT icon and select the number. PTZ : Pan/Tilt/Zoom controlling Remove Time, Resolution, channel info and etc. and display the video only. It is a still image transmitting function. In case of video disconnection due to network load while transmitting, you’d better use this function. Full screen view : If you turn iPhone on one side, it switches into full screen.
DIGITAL VIDEO RECORDER MANUAL 12-5 Search Select “Search” icon below. [1] Select Date/Time After selecting the date, click “Search” button.
DIGITAL VIDEO RECORDER MANUAL Reverse Playback Pause Playback Return to Live After clicking “CH SELECT” button, if you select a channel number, the channel is selected. 12-6 Relay out Relay can be controlled remotely.. Time selection : Alarm output time selection.
DIGITAL VIDEO RECORDER MANUAL 12-7 PTZ(Pan/Tilt/Zoom) Controlling PTZ controlling is available on iPhone. The way how to control is the same with on CMS and DVR.
DIGITAL VIDEO RECORDER MANUAL 13 — Windows Mobile Viewer 13-1 Program Installation Copy the program, MPRMS and save it to the mobile phone. 13-2 Run Program After save the program into the any folder, you can see the “MPRMS_Setup.cab” file as bleow picture. ☞ Please refer to the user’s manual of mobile phone how to copy and save the application program. Execute the “MPRMS_Setup.CAB” file then “MPRMS” icon will be created on the screen.
DIGITAL VIDEO RECORDER MANUAL You can see the icon of “MPRMS”. 13-3 Registration In order to see a video on mobile phone, user must register the DVR network information properly. For network setting, please refer to the user’s manual of DVR. [1] Registration Click the “Add DVR” tap to register a new DVR.
DIGITAL VIDEO RECORDER MANUAL [2] Fill in the required information. • NAME : Input any name of user’s own accord. • ID : Input the DVR’s login ID. • PASS : Input the DVR’s login password. • MODEL : Select a DVR model among H.264, MPEG-4 and MJPEG. [3] DDNS For Dynamic IP user, it supports DDNS service for mobile program. • Use DDNS : Check on the “Use DDNS”. • ID : Input the “WEB CODE” of DVR. You can find the WEB CODE information in the DVR’s System setup menu.
DIGITAL VIDEO RECORDER MANUAL • ADDR : Do not change the dedicated IP address. (61.250.157.14) • PORT : Input the port of DVR. • SAVE : Save the information. [4] STATIC (For Static IP User) • Use STATIC : Check on the “Use STATIC”. • ADDR : Input the IP address of DVR. • PORT : Input the port of DVR. (Basic : 3000) • SAVE : Save the information.
DIGITAL VIDEO RECORDER MANUAL • Connect : Click the “CONNECT” tap to see the video. • Info Setup : To modify the DVR information, click the “Info Setup” tap. • I Only : In case of using low bandwidth, the “I only” helps to see the image which allows to transmit the I Frame only. [2] Disconnect • Disconnect : Click the “Disconnect” to disconnect. [3] Changing Channel. ㆍCH : Click the “▼” to change a channel.
DIGITAL VIDEO RECORDER MANUAL 13-5 Search To playback recorded image, click the “Search” tap then click the “Rec Info Req” menu to set the date and time for searching. After setting the data and time, click the “START” to start playback. (NOTE : It might be delayed to playback that is depending on network environment.) 13-6 PTZ Control Click the “Pan Tilt” tap to control the PTZ camera. Press the direction button to move camera position.
DIGITAL VIDEO RECORDER MANUAL • Left : Move to the left • Right : Move to the right. • Up : Move to the upper. • Down : Move to the down. • STOP : Stop movement. • Normal/Invert : Change direction. 13-7 Zoom / Focus Click the “Zoom/Focus” tap to control zoom In / Out and Focus In / Out. • ZOOM IN/OUT : Control zooming of camera. • FOCUS IN/OUT : Control focusing of camera.
DIGITAL VIDEO RECORDER MANUAL Click the “Preset” tap to set up the preset of camera. • P1~P16 : Select a number. • MOVE / SET ◎ MOVE : After selecting a number among from P1~P16, press “SEND” to move camera location. ◎ SET : After selecting a number among from P1~P16, press “SEND” to set a location of camera. 13-9 Alarm Control Click the “Alarm” tap to control alarm output. • Select a number (1~16) : Relay out port. ( Default : 1 ) • Time : Set a dwell time. • ON/OFF : Press to start or stop.
DIGITAL VIDEO RECORDER MANUAL 14 — Remote connection- Andriod phone 14-1 Program installation To install the program on Phone, execute the ‘MARKET’ program and download the ‘MPRMS’ and install it. If the installation is completed, you will see the ‘MPRMS’ icon on main SCREEN (ORDER1) (ORDER2) (ORDER3) 14-2 Program execution If you click “MPRMS” icon, it will be executed.
DIGITAL VIDEO RECORDER MANUAL 14-3 Product information registration Please register the device to see it remotely [1] Registration Click ‘ADD’ button to start registration. [2] Input the registration information (ORDER1) (ORDER2) (ORDER3) (ORDER1) Input the Name, ID(User), Password. Name : Input any name you want.
DIGITAL VIDEO RECORDER MANUAL User : Input the USER ID. Password : Input the same password registered on DVR. (Notice : DVR ‘MENU’ Æ “SYSTEM” Æ PASSWORD Æ “USER ID” + “PASSWORD”) IP : It is for Static IP user only. (ORDER2) If you check “DDNS Use”, DDNS IP input space will be activated (Notice : It is for Dynamic IP user only ) (ORDER 3) How to check the DDNS ID: DVR ‘MENU’ Æ “SYSTEM” Æ SYSTEM INFORMATION. Copy the ‘WEBCODE’ and input it to DDNS ID and save it.
DIGITAL VIDEO RECORDER MANUAL 14-5 Remote connection Select the registered list for connection. Once you click the registered device, it shows information and if you click ‘OK’, it will connect DVR for monitoring. (List selection) (Detailed information) 14-6 Live It shows the live image as a real-time. (1) Numeric button : To select the channel click the numeric button. (2) I frame : If the network environment is not good, you can see the ‘i’ frame only.
DIGITAL VIDEO RECORDER MANUAL 14-7 Main menu On the bottom line of screen, there is the main menu. It is for the monitoring changes. Move to the previous menu or close the monitoring program.
DIGITAL VIDEO RECORDER MANUAL 14-8 PTZ It is for the remote PTZ control. (PTZ mode selection) (PTZ mode screen) (1) Move to PTZ mode Select the PTZ connected channel and click the PTZ button. (2) How to control the PTZ According to the click, PTZ moves to the selected direction. ZOOM. It can be operated by +/ -. FOCUS. It can be operated by +/ -. TOURING. It moves according to the previously registered ‘PRESET’ number.
DIGITAL VIDEO RECORDER MANUAL PTZ menu call AUTO FOCUS It is OK button for PTZ OSD menu It is CANCEL or upper menu on PTZ OSD menu 14-9 PRESET It controls PRESET on PTZ. (PRESET MODE SELECTION) (PRESET MODE SCREEN) (1) How to move PTZ mode Select the PTZ connected channel and click the PRESET button. (2) How to move PRESET • Move : Once you select “Move”, if you select the number, it moves. • Save : Once you select “Save”, if you select the number, it saves the current location.
DIGITAL VIDEO RECORDER MANUAL 14-10 Search It is for remote search. (1.SEARCH MODE SELECTION) (2.TIME SEARCH SELECTION) (3.DATE/TIME SELECTION) (1) SEARCH MODE : Select the SEARCH mode. (2) Time Search : Click the “Time Search” button to search the time to playback. (Notice : Return to LIVE, click ‘To Live” button. ) (3) DATE/ TIME : Once you select the DATE, TIME, if you click “Start Search”, it goes to Playback.
DIGITAL VIDEO RECORDER MANUAL 14-11 Relay out Relay can be controlled remotely.. (1) Relay : Select the usages (on / off) (2) Number : Select the relay number. (3) Time : Select the relay out duration. (4) Execute : According to the setup 1~3, relay out operates 14-12 Information display It shows the information of current connection.
DIGITAL VIDEO RECORDER MANUAL [Information display] It is the example of information. • IP : 61.250.157.37 : 2000 Via DDNS <- Connected IP information. • MODEL : 16CH(63,ADT CAPS:0) <- 16Ch --- model • WebCode : H6F6057200001394 <- Product ID(webcode). • F/W : 84, N/W:21 <- F/W and network version. • VSTD : NTSC <- VIDEO standard. 14-13 Disconnection It disconnects the program. (Back button selection) (Yes YES button selection) There are a couple of program termination mode. 1.
DIGITAL VIDEO RECORDER MANUAL 15 — Appendix SPECIFICATION ITEM Video 4CH 8CH Video format Video inputs Record NTSC/PAL 4CH 8CH Compression H.
DIGITAL VIDEO RECORDER MANUAL Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 1 year on parts and labor from the date of original purchase.
DIGITAL VIDEO RECORDER MANUAL MEMO DIGITAL VIDEO RECODER MANUAL 87
