DVR User Manual

Chapter 2. Hardware Description
2. Rear Panel
Page 20
① Power input – connection port for DC 12 volt
② Toggle Power Switch – POWER ON and POWER OFF switch that turns unit on and off
③ VGA (Video Graphics Array) Port – Location where VGA monitor cable must be inserted
④ Audio Out – Mono RCA, 1Vpp, 10k ohm
⑤ S-Video – S-Video out connection
⑥ Audio Input – Mono RCA, 1Vpp, 10k ohm, available in 4 channels
⑦ Main Monitor Output – BNC main monitor output
⑧ SPOT Monitor Output – Secondary monitor output for public display
⑨ Camera Input / Video Loop Out – Analog Type BNC camera plug-in location and video loop out
⑩ Serial Connection – 9 pole D-Type male connector
⑪ PTZ, Sensor, Alarm Out Port – Single TX(+), single RX(-), 1 Alarm out, 4 Sensor In via pluggable 10-
way terminal block
⑫ USB Port – Connection for USB mouse or for small USB memory device
⑬ Network Port – Ethernet port