Instruction Manual
Shenzhen Cloudecho Audio Co. Ltd
5
(Remote control)
* Instruction
1. Power on and reset
(1) When power is on, the system has an initialization process. During the initialization process, the
indicator light is in a running state. After the initialization is completed, the first mode entered by
the device is the mode memorized before the last power-off, and the volume, high and low bass
will also be set to the size before the last power-off;
(2) If you want to reset the volume, high and low sounds, you can press and hold the RESET/WPS
button on the back of the device for 3 seconds, and you can let go when you see all the lights flash
quickly (200ms on and 200ms off).
2. Modes and switching