Installation Instructions

Mobile App operation
Step 1 Download the Doodle Smart App
● Arrange to download the Doodle Smart App by scanning
the QR code below
● Either head to the App Store or major Android App markets
to search for "Doodle Intelligence" to download an App, anyway.
● Invest in something to open the Doodle Smart App, click
Register, sign up for an account and log in.
Step 2 Create a Doodle Smart App account and log in
Step 3 Add a dimmer
● Click on the top right , Add Device;
● Click Lighting and then click to enter the device
connection interface.
Step 4 Connect the mobile phone
● According to the network mode, when the phone is on, you
press the on key five times or hold down the key for a long
time, and the status indicator blinks blue to connect the phone
to a dimmer (if it is not connected, you log out of the network
mode three minutes later).
Note:
Buy a way to access the Internet, by switching on your
phone's Wi-Fi and Bluetooth at the same time.
● Smartphone APP controls the dimmer 5 minutes later,
when the phone's bluetooth is switched on during a
Wi-Fi disconnect.
Step 4a Rapid distribution network
● Put your phone's Wi-Fi and Bluetooth on at the same time to
automatically scan for internet-enabled devices.
● Click Add，wait for connect.
Step 4b Normal distribution network
Step 5 Use the mobile phone App to control the dimmer
● To confirm that the App control indicator LED1 is blinking,
click Next.
● Buy a ticket to enter your home Wi-Fi password, click Next,
and wait for the connection.
●
Click to control the light on and off function of the
dimmer;
● Slide the for dimming;
● clicking the ,enter the interface for setting the dimmer's
brightness range.
● Set the minimum brightness and maximum brightness of the
lamp controlled by the dimmer and save.
● clicking the set the dimmer to switch the light on
and off at a certain time;
● Virtual gateway Adds a timing and saves it.
● Dimmer can be shared between multiple people once
connected, meaning one dimmer can be controlled by
multiple apps.
● Click the upper right corner to enter the device
details interface.
● Queue to enter the Device sharing interface by clicking
Share Device.
Supports Amazon Alexa and Google Home voice controls
●
☆
For Amazon Alexa
Alexa,turn on <device name>
☆ Alexa,turn off <device name>
☆ Alexa,set <device name> to percent
☆ Alexa,brighten/increase <device name>
☆ Alexa,dim/decrease <device name>
● For Google Home
☆ Hey Google,turn on <device name>
☆ Hey Google,turn off <device name>
☆ Hey Google,is <device name> on/off?
☆ Hey Google,brighten/increase <device name>
☆ Hey Google,Dim/Brighten <device name> by 50%
Buy a shared account by clicking Add Sharing.