Installation Instructions

 DC INPUT

Power supply input range (7-9 Volt DC)
There are two methods of supply power to ISOLO
receiver using power DC7V Converter Cable:
1. Connect it to power adapter(5V/2A), then plug it into
a wall socket.
2. Directly connect it to a power bank.
 LINE/MIC GAIN

0dB~40dB
 POWER INDICATOR
Battery level high Battery level medium Battery level low
(needs to be charged)
 OUTPUT

1. 1/4 inch (6.3mm) balanced TRS output
(T = positive (+), R = negative (-), S = ground)
2. 1/4 inch (6.3mm) unbalanced TS output
(T = positive (+), S = ground)
 LINE/MIC INPUT

Two kind of input
High impedance input for instrument pickups* and
line-level sources
1. 1/4 inch (6.3mm) balanced TRS input
(T = positive (+), R = negative (-), S = ground)
2. 1/4 inch (6.3mm) unbalanced TS input
(T = positive (+), S = ground)
 FAR/NEAR

Near mode 15 meters Line-of-sight.


Far mode 30 meters Line-of-sight.



*Actual distance depending on the environment
*recommended passive pickups to avoid interference
the power consumption of battery on microphone
transmitter will change along with the distance of the choice receiver
Two kind of output
Blue light
Green light Red light

Near
Far
5hrs - 3.5hrs 3.5hrs - 0.5hrs <0.5hrs
7hrs - 4.5hrs 4.5hrs - 0.5hrs <0.5hrs
 