User guide

MA60 & MA60media Installation and User Guide v1.2
34
Technical specications
Line inputs
Frequency response
Low-Z output: +0 dB/-1 dB from 20 Hz – 20 kHz (65 Hz lter out)
100/70/50 V-line outputs (with CXL-50T transformer tted): +0 dB/-3 dB
from 20 Hz – 20 kHz (65 Hz lter switched out)
Distortion
Low-Z output: <0.05% @ 1 kHz, 1 dB below full power (80 kHz bandwidth)
High voltage output: <0.05% @ 1 kHz, 1 dB below full power (80 kHz
bandwidth)
Sensitivity 195 mV (-12 dBu) to 2.0 V (+8 dBu)
Input Gain control 20 dB range
Input impedance 47k ohms
Headroom >20 dB
Noise -93 dB, 22 Hz –22 kHz, at speaker output, relative to full power
Microphone Inputs
Frequency response
Low-Z output: -3 dB @ 100 Hz (3rd. order lter); -1 dB @20 kHz
High voltage output: -3 dB @ 100 Hz (3rd. order lter); -2 dB @20 kHz
Distortion <0.05% @ 1 kHz, 1 dB below full power (80 kHz bandwidth)
Gain range 40 dB range
Input Impedance >2k ohms (balanced)
Phantom Power 15 V, switchable per-input by jumpers
Headroom >20 dB
Noise -127 dB EIN 22 Hz-22 kHz (150 W)
Outputs
Output Power
60 watts @ 1 kHz & <0.07% THD+N Low impedance output
50 watts @ 1 kHz & <0.07% THD+N 50/70/100V line outputs (optional
transformer tted)
Equalisation HF: ±10 dB/5 kHz LF: ±10 dB/100 Hz
Protection
Dynamic level signal limiter max gain reduction of 20 dB, thermal protection,
IV limiting & short circuit protection, switch on delay