User guide

MA60 & MA60media Installation and User Guide v1.2

Pre Out

To permit the connection of additional ampliers (or other equipment), a balanced

output from the MA60/MA60media’s pre-amplier section is available at a rear panel

3-pole, 3.81 mm-pitch screw terminal connector.

MA60 Pre Out:

pin 1 ground

pin 2 cold

pin 3 hot

Balanced Input (e.g., XLR):

pin 1 ground

pin 2 hot

pin 3 cold

SCN

1 2 3

SCN

MA60 Pre Out:

pin 1 ground

pin 2 cold

pin 3 hot

Unbalanced Input

(e.g., phono)

1 2 3

SCN

All the unit’s controls and settings on the front and rear panels (levels, source selection,

priority settings, etc.) are effective at the Pre Out. However, note that neither the

switchable 65 Hz high pass lter nor the tting of an optional loudspeaker EQ card

have any effect on this output.

Music Mute Input

In some installations (such as licensed premises or retail outlets within a shopping

mall), there may be a local authority or re service requirement to mute the music

signals from a re alarm control panel when an alarm condition arises. The MA60/

MA60media includes a facility to mute the music programme only (i.e., the mic input

is still active), via the Music Mute input. This is a 2-pin 5 mm-pitch screw terminal