User guide

ManualsBrandsCloud ManualsDomestic AppliancesDCM-1

Conguration

DCM-1 User Manual v1.0 35

System Menu

CDR Zone Setup

select ZoneButtons:



The CDR ZONE SETUP menu function lets the operator

put the CDR-1s in a system into Engineers Mode. In this

mode, per-Zone output EQ can be adjusted locally, in the

zone itself. This permits much faster and easier optimisation

of the sound as the adjustment is made from the CDR-1(s)

rather than from the DCM-1.

The eight numeric buttons correspond to the eight Zones;

select the Zone(s) where EQ is to be adjusted by pressing

the appropriate key(s). The default is for EQ Setup Mode to

be OFF for all Zones. A second press exits the mode. Note

that the keys’ illumination indicates current Zone status at

all times.

The rotary control is not used in this function.

Once a Zone has been enabled, pressing the ZONE button

twice on the CDR-1(s) in the Zone will bring up the Enter

Key request (see note below).

Zone

Enter Key

When the CDR‑1 key has been entered, the rst EQ

adjustment screen (Treble) opens. Adjustment of HF EQ

can be made with the + and – buttons. The available range is

±14dB, in 2dB steps.

CDR Zone Setup

Zone 1

Stereo X

Edit Input Label

Input 1

Edit Zone Label

Zone 1

Edit Group Label

Group 1

Set Key

1234

RS232 Baud Rate

9600

RS232 Flow

No Flow

Power Up Mode

Factory

Save Defaults

Update Firmware

Reset Mixer

System Menu Flow Diagram