User guide

Conguration
DCM-1 User Manual v1.0 31
Installer Mode
The remainder of the DCM-1’s menu system is only available
in Installer Mode; this is accessed by pressing the INSTALL
button and entering the key in response to the display
prompt. Installer Mode self-cancels after 45 seconds if no
further adjustments are made.
Music Menu
Select Input
This function is described above, in User Mode.
Level
This function is described above, in User Mode.
Treble
Rotary:
Buttons:
adjusts HF EQ
select Zone


This adjusts the music high-frequency EQ in each Zone. The
equaliser is a 6dB/octave shelving lter with a 3dB point at
10kHz.
The eight numeric buttons correspond to the eight Zones;
select the one to have its EQ adjusted.
The rotary control adjusts the HF EQ in the selected Zone.
The range of adjustment available is ±14dB in 2dB steps.
Mid
Rotary:
Buttons:
adjusts MF EQ
select Zone


This adjusts the music mid-frequency EQ in each Zone. The
equaliser is a simple bell lter with a centre frequency of
1.2kHz.
The eight numeric buttons correspond to the eight Zones;
select the one to have its EQ adjusted.
The rotary control adjusts the MF EQ in the selected Zone.
The range of adjustment available is ±14dB in 2dB steps.
Bass
Rotary:
Buttons:
adjusts LF EQ
select Zone


This adjusts the music low-frequency EQ in each Zone. The
equaliser is a 6dB/octave shelving lter with a 3dB point at
50Hz.
The eight numeric buttons correspond to the eight Zones;
select the one to have its EQ adjusted.
The rotary control adjusts the LF EQ in the selected Zone.
The range of adjustment available is ±14dB in 2dB steps.
Select Input
Input 1
Level
|||||||||
Treble
0dB
Mid
0dB
Bass
0dB
Minimum Level
-oodB
Maximum Level
0dB
Sig ||
Gain +2dB
Music Menu Flow Diagram