User guide

DCM-1 User Manual v1.0
Overview
12
Remote Control
Optional CDR-1 dedicated remote control for DCM-1
available separately
Up to 100 CDR-1s may be connected to the 4 CDR-1
Ports, using standard CAT-5 UTP cable.
CDR-1s can be daisy-chained and/or wired directly to
the CDR-1 Ports as cabling convenience dictates.
Multiple CDR‑1s per‑zone permitted
CDR‑1 provides local (in‑zone) user control of source
selection and level control and key-protected EQ
adjustment.
RS232 serial remote control interface for integration
with 3rd.-party control systems (Crestron, AMX, etc.)
•
•
•
•
•
•
Misc
Programmable external Music Mute input for re alarm
interface, etc.
One input (mic or line) can be installer‑congured to
be protected from Music Mute (e.g. for evac message,
emergency mic, etc.)
Optional Bose
®
speaker EQ cards (per‑zone)
•
•
•
AREA 1
AREA 2
AREA 3
POWER
AMPLIFIERS
OTHER
AREAS
CD PLAYER
PC
RADIO
TUNER
FREEVIEW
RECIEVER
CDPM
PAGING
STATION
CDR-1
CDR-1
CDR-1
INPUT 1
INPUT 6
INPUT 4
INPUT 8
INPUT 2
INPUT 7
INPUT 3
INPUT 5
CDPM
MIC 1
MIC 4
MIC 2
MIC 3
PAGING MIC
PAGING ACCESS
1
2
3
4
ZONE 5
ZONE 3
ZONE 2
ZONE 6
ZONE 8
ZONE 4
ZONE 7
ZONE 1
CDR-1
POR
TS
DCM-1
System 1
Applications and Examples
The DCM‑1 will nd application in many types of premises,
including shops, bars, hotels, schools, conference centres,
ofces, etc. The congurational exibility of the DCM‑1
means that it can be set up by the system designer to
provide precisely the facilities the user needs.
A few simple examples are given below to illustrate typical
installations.
System 1
This depicts a simple system where four possible audio
sources are made available to three or more zones (areas).
Only three are shown for clarity. Points to note:
Each of the three areas shown is equipped with a
CDR-1 remote control. Note that Area 3’s remote
is wired directly back to the DCM-1, while those in
Areas 1 & 2 are daisy-chained together and wired back
to the DCM-1 separately. This is possible because the
DCM-1/CDR-1 permit almost any wiring topology that
is convenient for the building layout.
Area 3 has a Cloud CDPM paging microphone, which
would be used to originate voice messages to any of
the other areas. The paging level to Area 3 (if required)
would be adjusted on installation to be at a level that
does not cause feedback.
•
•