User guide

DCM-1 User Manual v1.0
Overview
10
ME-1
The ME-1 input connector plate provides two balanced
microphone inputs, and is useful in multi-purpose areas
where mics are sometimes needed. The ME-1 has adjustable
mic level and EQ per input, and connects to one of the
DCM-1’s four dedicated Mic Inputs with a single screened
CAT-5 cable. The ME-1’s two inputs are mixed together at
the plate, and the summed mic signal applied to the DCM-1.
Any of the DCM‑1’s mic inputs can be routed to any zone
without restriction.
Inputs on the ME-1 are via latching 3-pin female XLR
connectors. 12v phantom power is available on either input
if required (set via a jumper accessible from the rear plate).
CDPM range
The CDPM range of paging microphones integrate directly
with the DCM-1 and provide a simple and convenient
method of adding multi‑zone paging facilities to the audio
system. Multiple CDPMs can be easily daisy-chained if more
than one paging location is needed.
Full installation and operation instructions are supplied
separately with each CDPM unit.
(Cloud Digital Paging Microphone)