Operation Manual
41
9.9.1 Firmware Update
IMPORTANT: Please restart your device by removing the power cord from the wall outlet or
power connector port on the rear of the device. This will ensure that your device is
ready for the rmware update process.
Firmware Version
Your current rmware version, changes according to the current public release rmware.
Kernel Version
System kernel version
Check for Firmware Update
Ensure that you are connected to the Internet before proceeding. Use this option to check if a new
rmware is available for your device. If it is, you will be presented with a disclaimer. Please read it
carefully before proceeding with the rmware update.
WARNING: DO NOT DISCONNECT THE POWER TO THE DEVICE DURING THE FIRMWARE
UPDATE PROCESS. Doing so may cause the device to become inoperable.
Tip: ThePopcornHourVTENsupportsofinermwareupdating.Pleasevisitoursupportwebsite
for more information.
Reset to Factory Setting
If you ever need to reset all your device settings, you may do so here. You should do this after
each rmware update.