Operation Manual

9
5.4 Connecting to TV via Component
What you need:
o Popcorn Hour VTEN
o Power Supply
o Component Cables (not included)
o TV with Component Terminal
Step 1
Connect the component cables to both the component terminals on the VTEN and your TV by matching
the green, blue and red video plugs and the red and white audio plugs to their coordinating terminals.
Note: If your component cables only include the green, blue and red plugs you will need to use a set of
composite cables to connect to the TV for audio. If doing so, you do not need to connect the yellow plug.
Step 2
Connect the AC power cord to AC power adapter. Then plug the power cord into your wall socket and
connect the power lead to Popcorn Hour VTEN. Your Popcorn Hour VTEN is booting up now, check your
TV for further instructions.
POWER
CVBS
RPr
LPb Y
eSATA
HDMIUSB3.0 SLAVE
OPTICAL
COAXIAL
AUDIOVIDEO
12.0V
+
3.5A MAX
POWER
CVBS
RPr
LPb Y
eSATAHDMIUSB3.0 SLAVE
OPTICAL
COAXIAL
AUDIOVIDEO
12.0V
+
3.5A MAX
IR
TV Back Panel Connectors
ANT IN
COMPOSITE IN
L
R
POWER
CVBS
RPr
LPb Y
eSATA HDMIUSB3.0 SLAVE
OPTICAL
COAXIAL
AUDIOVIDEO
12.0V
+
3.5A MAX
IR
HDMI
COAXIAL
eSATA
OPTICAL
+
5V/3A
IR
Step 2
Connect the AC power cord to AC power adapter. Then plug
the power cord into your wall socket and connect the power
lead to Popcorn Hour VTEN. Your Popcorn Hour VTEN is
booting up now, check your TV for further instructions.