User manual

VB7009
VB7009VB7009
VB7009 User Manual
User ManualUser Manual
User Manual
73
6.18. SuperIO Device
Onboard Serial Port 1
Onboard Parallel Port
SuperIO Device
[3F8/IRQ4]
[378/IRQ7]
Onboard Serial Port 2 [2F8/IRQ3]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
Onboard Serial Port 3 [3E8/IRQ4]
Onboard Serial Port 4 [2E8/IRQ4]
Phoenix - AwardBIOS CMOS Setup Utility
Item Help
Menu Level
ESC: Exit
F5: Previous Values
: Move
F10: Save
Enter: Select +/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults
6.18.1. Onboard Serial Ports 1 ~ 4
Set the base I/O port address and IRQ for the onboard serial ports. Selecting
“Auto” allows the BIOS to automatically determine the correct base I/O port.
Port
PortPort
Port Address
AddressAddress
Address IRQ
IRQIRQ
IRQ
1 Disabled, 3F8, 2F8, 3E8, 2E8, 338, 348, Auto 4
2 Disabled, 3F8, 2F8, 3E8, 2E8, 338, 348, Auto 4
3 Disabled, 3F8, 2F8, 3E8, 2E8, 338, 348, Auto 4
4 Disabled, 3F8, 2F8, 3E8, 2E8, 338, 348, Auto 4
6.18.2. Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Settings: [Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7]
6.18.3. Parallel Port Mode
Set the parallel port mode. To operate the onboard parallel port as Standard
Parallel Port, choose SPP. To operate the onboard parallel port in the EPP
mode, choose EPP. By choosing ECP, the onboard parallel port will operate in