Specifications

Joystick Support
CooCoo v0.1 emulates Tandy analogue joystick input via the Nintendo Gamecube controller.
[further details TBD]
Glenside IDE / Cloud-9 SuperIDE Interface
CooCoo v0.1 emulates the above-mentioned IDE interfaces via an on-chip IDE controller
implementation. The back-end of the IDE controller is connected to either a CF socket or SD/MMC
card socket, depending on the target hardware.
The IDE functionality is register-compatible with either controller.
CF and/or SD cards can be freely interchanged between a functioning Coco system and CooCoo.
Note that the extended functionality of the SuperIDE controller, such as the user-programmable
flash and real-time clock, are not supported at this time.