SDS

CloSure Clean
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
02/26/2016 FII-XX-CC
EN (English US)
9/13
Pollutant
Proper Shipping Name (IMDG)
:
CORROSIVE SOLIDS, TOXIC, N.O.S. (Sodium chlorite), 8;6.1, II, Marine
Pollutant
Transport Document Description (DOT)
:
CORROSIVE SOLIDS, TOXIC, N.O.S. (Sodium chlorite), 8;6.1, II, Marine
Pollutant
Transport Document Description (TDG)
:
CORROSIVE SOLIDS, TOXIC, N.O.S. (Sodium chlorite), 8;6.1, II, Marine
Pollutant
Transport Document Description (Adr) (IMDG/IATA)
:
CORROSIVE SOLIDS, TOXIC, N.O.S. (Sodium chlorite), 8;6.1, II, Marine
Pollutant
Transport Hazard Class(es)
Department Of Transportation (DOT) Hazard Classes
:
8 - Class 8 - Corrosive material 49 CFR 173.136
Hazard Labels (DOT)
:
8 - Corrosive
6.1
- Poison
DOT Symbols
:
G - Identifies PSN requiring a technical name
Packing Group (DOT)
:
II - Medium Danger
DOT Special Provisions (49 CFR 172.102)
:
IB8 - Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B, 21N, 31A, 31B and
31N); Rigid plastics (11H1, 11H2, 21H1, 21
H2, 31H1 and 31H2); Composite
(11HZ1, 11HZ2, 21HZ1, 21HZ2, 31HZ1 and 31HZ2); Fiberboard (11G);
Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5,
13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).
IP2
- When IBCs other than metal or rigid plastics IBCs are used, they must
be offered for transportation in a closed freight container or a closed
transport vehicle.
IP4
- Flexible, fiberboard or wooden IBCs must be sift-proof and water-
resistant or be fitted with a sift
-proof and water-resistant liner.
T3
- 2.65 178.274(d)(2) Normal............. 178.275(d)(2)
TP33
- The portable tank instruction assigned for this substance applies for
granular and powdered solids and for solids which are filled and
discharged at temperatures above their melting point which ar
e cooled
and transported as a solid mass. Solid substances transported or offered
for transport above their melting point are authorized for transportation in
portable tanks conforming to the provisions of portable tank instruction T4
for solid substances
of packing group III or T7 for solid substances of
packing group II, unless a tank with more stringent requirements for
minimum shell thickness, maximum allowable working pressure, pressure
-
relief devices or bottom outlets are assigned in which case the mo
re
stringent tank instruction and special provisions shall apply. Filling limits
must be in accordance with portable tank special provision TP3. Solids
meeting the definition of an elevated temperature material must be
transported in accordance with the ap
plicable requirements of this
subchapter.
DOT Packaging Exceptions (49 Cfr 173.xxx)
:
154
DOT Packaging Non Bulk (49 Cfr 173.xxx)
:
212
DOT Packaging Bulk (49 Cfr 173.xxx)
:
240
TDG Primary Hazard Classes
:
8 - Class 8 - Corrosives
Tdg Subsidiary Classes
6.1
Hazard Labels (TDG)
:
8 - Corrosive substances
6.1 - Toxic substances