SDS

Clorox® Disinfecting All Purpose Cleaner Spray – Lemon
Revision Date 14-October-2020
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 3 / 7
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment
Unsuitable extinguishing media
CAUTION: Use of water spray when fighting fire may be inefficient.
Specific hazards arising from the chemical
No information available.
Explosion Data
Sensitivity to Mechanical Impact
None.
Sensitivity to Static Discharge
None.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
None under normal use conditions.
Other Information
Refer to protective measures listed in Sections 7 and 8.
Environmental precautions
Environmental precautions
Refer to protective measures listed in Sections 7 and 8. See Section 12 for additional
Ecological Information.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product.
Conditions for safe storage, including any incompatibilities
Storage
Keep container tightly closed in a dry and well-ventilated place.
Incompatible products
None known based on information supplied.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies
Appropriate engineering controls