User manual

5. Software Update
Step-by-step procedure:
1. Connect the SRF150 server to a PC via the USB cable.
2. Connect the power tip to the SRF150 server.
3. Plug the server’s power adapter into the 230V AC/50-60Hz mains socket.
4. Install the Clone+ Update application from the CD-ROM.
5. Start the Clone+ Update application and then press „Software Update”.
6. The software update will take about 3 seconds. The prompts will be displayed.
7. Unplug the power adapter from the 230V AC/50-60Hz mains socket.
8. Disconnect the USB cable from the SRF150 server.
Note:
After the software has been successfully updated, please follow the instructions in
4.1 - Installation of the SRF150 Access Server and authorisation of the CRF150 Client
Cards.
Connect the SRF150 server to a PC via the USB cable.
48 49