Operation Manual

5. Software Update
Step-by-step procedure:
1. Connect the SRF150 Server to a PC via the USB cable.
1. Connect the power tip to the SRF150 Server.
1. Plug the server’s power adapter into the 230V AC/50-60Hz mains socket.
1. Install the Clone+ Update application from the CD-ROM.
1. Start the Clone+ Update application and then press „Software Update”.
2. The software update will take about 3 seconds. The prompts will be displayed.
1. Unplug the power adapter from the 230V AC/50-60Hz mains socket.
1. Disconnect the USB cable from the SRF150 Server.
Note:
After the software has been successfully updated, follow the instructions in 4.1
- Installation of the SRF150 Access Server and authorisation of the CRF150 Client
Cards. In case of using Twin Slot Interface, follow the instructions in 4.2.
Connect the SRF150 Server to a PC via the USB cable.
22 23