Operation Manual
6. Restoring the factory settings
Step-by-step procedure:
1. Connect the power tip to the server.
1. Plug the server’s power adapter into the 230V AC/50-60Hz mains socket.
1. Wait until all the LED indicators are ON (after about 15 minutes).
Note:
After restoring the factory settings of the unit, follow the instructions in 4.1 - Installation
of the SRF150 Access Server and authorisation of the CRF150 Client Cards. In case of
using Twin Slot Interface, follow the instructions in 4.2.
7. Usage and maintenance
Correct disposal of this product:
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government oce, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
30 31