Instruction Manual

When the ALARM SWITCH is placed to
"((c[)l" (HOURLY ANNOUNCEMENT)
position ( "announcement on" will be
the " ◊ " mark will be shown and time is
adjusted automatically.
announced), the unit will announce the time
at every hour during 8 AM to 10 PM. Outside
this range hourly announcement is
automatically shut off
To deactivate both the alarm function and the
hourly announcement function, place the
ALARM SWITCH to "OFF" position.
Select the announcement volume
To select the high volume level, set the VOL
(VOLUME) SWITCH to
"HI" position. To
select the low volume level, set to "LOW"
position.
Function Lock
When traveling, the unit can be locked to
avoid setting the unit accidentally. To lock
the unit, place the LOCK SWITCH to
"LOCK" position. The SET BUTTON,
DOWN-UP BUTTON and the SNOOZE-
TALK (1) BUTTON will be deactivated. The
user can still listen to the time or date by
pressing the SNOOZE-TALK (2) BUTTON,
when the unit is locked.
To unlock, place the LOCK SWITCH to
"UNLOCK" position.
Time and date announcement
BUTTON once, and current time is
announced and the display will light up; press
the SNOOZE-BUTTON twice quickly,
and the date is announced and the display will
light up.
e.g. current time and date is AM 4:02 and
April 1
st
(Sunday).
Press SNOOZE-TALK (1) or (2) BUTTON
once: "The time is now two minutes past
four”
will be announced.
Press SNOOZE-TALK (1) or (2) BUTTON
twice quickly: "Today's Sunday, April first”
will be a
nnounced.
Change of daylight saving time
The unit will adjust to standard time or
daylight
saving time automatically, when
the time signal is received successfully.
When it is changed to daylight saving time,