User Guide
7
Customer Side
Inst
allation
Surface
Mounted Kit
1.
Place
the speaker and microphone pods on the customer side of the
counter
t
op
.
2. Disassemble the speaker and microphone pods by undoing the screws
and
removing
the
housing.
3.
Place
the
mounting
br
ack
ets
adjacent
t
o
either
side
of
the
pass-through
tray, at
least
2-3mm away from the
scr
een.
4. Mark the four fixing
points
and two cable holes to be
drilled.
5. Ensure
there
will be
access
to
retrieve
the
cables
and drill the
holes.
Cable
holes
Fixing
points
6.
Fix
the
spe
ak
er
and
micr
ophone
pods
t
o
the
count
er
,
and
f
eed
the
wir
es
through
the cable
management holes.
7. Refit the
housing
with
previously removed
screws.
8.
Rout
e
all
cabling
ne
atly
t
o
the
amplifier
location
on
the
st
aff
side.
Housing
fixing points